Anvil® 0310000609 FIG 1101 Standard 90 deg Pipe Elbow, 3/8 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
-
BrandAnvil®
-
UPC690291346309
-
Manufacturer Part Number0310000609
-
CountryUSA
-
Temperature Rating-20 to 150 deg F
-
FinishBlack Oxide
-
MaterialMalleable Iron
-
Fitting/Connector Type90 deg Elbow
-
Pressure Class150 lb
-
Pressure Rating300 psi
-
TypeStandard
-
Schedule RatingSCH 40/STD
-
Nominal Size3/8 in
-
SeriesFIG 1101
-
Domestic/ImportDomestic
-
End StyleFNPT
- Malleable iron pipe fittings hold two different pipe parts together and direct gas and liquid movement.
- Wide range of products for sprinkler systems, drainage systems other installations, including fittings, connectors, unions, plugs and bushings, clamps and more
- Accurate form, length and straightness on threads for easy engagement
- Chamfered openings for fast, easy engagement and assembly
- Precision machining
- Rust-Resistant coating
- 0.95 in center to end
- 0.36 in L thread
- 0.54 in take out
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 66202 |
-
UNSPSC40172806
-
Package Description30/PK
-
Standards/ApprovalsASME B16.3|cULus Listed|FM Approved|NSF/ANSI 61|ASME B16.14/B16.4/B1.20.1|ASTM A153/A197|WW P521
-
Alternative Part NumberC.BML
-
Specification Sheet
Recently Viewed
Anvil® 0310000609 FIG 1101 Standard 90 deg Pipe Elbow, 3/8 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Charlotte PVC 02117 1000 2117, 3/4 in nominal, FNPT end style, SCH 40, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
GARVIN® LB150 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 1-1/2 in Hub, Die Cast Aluminum, Powder Coated
1-1/2 in LB-style conduit bodies are attached to 1-1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
HCI Preferred Supplier 98815 Industrial Interchange Pipe Plug, 3/8 in Nominal, MNPT, Steel
HCI Preferred Supplier 98815 Industrial Interchange Pipe Plug, 3/8 in Nominal, MNPT, Steel
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Milton 787 1/4" FNPT T style sleeve ring body couplers have a 1/4" basic flow size and a maximum inlet pressure of 300 PSI. These T style couplers with oversized sleeve rings offer air flow of up to 40 SCFM.
1/4 in FNPT T-style sleeve ring body Couplers have a 1/4 in basic flow size and a maximum inlet pressure of 300 psi. These T-style Couplers with oversized sleeve rings offer air flow of up to 40 scfm.
