Gates® Power Transmission MegaCrimp™ 6G-6MJ G25 Straight Hydraulic Coupling, 3/8 in x 9/16-18 Nominal, Hose x Male JIC 37 deg Flare End Style, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
-
BrandGates® Power Transmission
-
UPC72053322941
-
Manufacturer Part Number6G-6MJ
-
CountryUSA|Canada
-
MaterialSteel
-
TypeStraight
-
Nominal Size3/8 in x 9/16-18
-
Hex Size17 mm Stem
-
SeriesG25
-
Domestic/ImportDomestic
-
Length2.3 in
-
End StyleHose x Male JIC 37 deg Flare
- Robust "Bite-the-wire" crimp
- Low profile
- Full stem insertion
- Full length crimp
- Tested to industry leading 600000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat™ plating for 3X better corrosion resistance than SAE standard
- 1.20 in cut-off length
-
Alternative Part NumberG25165-0606|710336155
-
UNSPSC40172601
-
Package Description1/PK
-
Standards/ApprovalsASTM B-117
-
WarrantyLimited
-
Warranty Information
-
Catalog
Recently Viewed
Gates® Power Transmission MegaCrimp™ 6G-6MJ G25 Straight Hydraulic Coupling, 3/8 in x 9/16-18 Nominal, Hose x Male JIC 37 deg Flare End Style, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
MORSE® 59610 5970 Premium Carbide Burr, Radius End, Taper Head, 5/8 in Dia Head, 1-5/16 in L of Cut, 3-1/16 in OAL, Double Cut
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
United Abrasives-SAIT 1AX Quick Ship™ 60538 Semi-Friable Coated Abrasive Belt, 2 in W x 72 in L, 80 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
MORSE® 59605 5970 Premium Carbide Burr, Radius End, Taper Head, 1/4 in Dia Head, 5/8 in L of Cut, 2 in OAL, Double Cut
