Gates® Power Transmission MegaCrimp™ 16MP-12FPX G60 SAE to SAE Straight Adapter, 1-11-1/2 x 3/4-14 Nominal, Male NPTF x Feamle NPSM Swivel, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
-
BrandGates® Power Transmission
-
UPC072053159868
-
Manufacturer Part Number16MP-12FPX
-
CountryUSA
-
MaterialSteel
-
TypeSAE to SAE
-
Nominal Size1-11-1/2 x 3/4-14
-
SeriesG60
-
Domestic/ImportImport
-
End StyleMale NPTF x Feamle NPSM Swivel
- Robust "Bite-the-wire" crimp
- Low profile
- Full stem insertion
- Full length crimp
- Tested to industry leading 600000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat™ plating for 3X better corrosion resistance than SAE standard
- 30 deg NPSM seat
- 30 deg NPTF seat
- 60 deg thread angle
- For use up to SAE 100R2 maximum working pressure
-
Alternative Part NumberG60140-1612|725910935
-
UNSPSC40141734
-
Package Description1/PK
-
WarrantyLimited
-
Warranty Information
-
Catalog
Recently Viewed
Gates® Power Transmission MegaCrimp™ 16MP-12FPX G60 SAE to SAE Straight Adapter, 1-11-1/2 x 3/4-14 Nominal, Male NPTF x Feamle NPSM Swivel, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
Justrite® 09200 Countertop Oily Waste Can, 2 gal Capacity, 9-5/8 in Dia x 9-1/8 in H, Galvanized Steel, Red
Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For the safe collection and storage of oil-soaked materials, reducing fire risks and promoting workplace safety and environmental responsibility in industries, such as automotive, manufacturing and construction.
REQUIRED FOR USE WITH 12- OR 110-VOLTS ELECTRIC PUMPS. RECOMMENDED FOR DISPENSING GASOLINE, UP TO 15% ETHANOL, DIESEL FUEL, KEROSENE, AND OIL. NOT RECOMMENDED FOR BIO-DIESEL. OIL-RESISTANT TUBE AND COVER. SPIRAL REINFORCED WITH SYNTHETIC YARN. INCLUDES STATIC WIRE BUILT INTO HOSE WALL. COUPLED MALE X MALE WITH A BUILT IN STATIC WIRE DISSIPATES STATIC ELECTRICITY ASSOCIATED WITH ELECTRIC PUMPS.
-JWH574279 >
Browning® Classical Gripbelt® 1009141 TC Series Type 10 Web Single Groove Sheave, Split Taper Bore, 3/4 to 2-11/16 in Dia Bore, 8 in OD, 8 in Dia Pitch, 1-1/4 in W Face
The UltraCon® SS4 anchor is a 410 stainless steel Screw Anchor for light to medium duty applications in concrete and masonry block base materials. The Screw Anchor is fast and easy to install and provides a neat, finished appearance. UltraCon® SS4 anchors feature a Stalgard® coating and provide enhanced corrosion resistance over carbon steel fasteners.
Browning® Gearbelt® 3514049 Type D Arm Synchronous Timing Pulley, 1/2 to 2-15/16 in QD® Bore, 13.315 in OD, 84 Grooves, 13.369 in Dia Pitch, 1-13/16 in W Face
