HCI Preferred Supplier 66011 Hose End, 3/4 in, FNPT, Ductile Iron
HCI Preferred Supplier 66011 Hose End, 3/4 in, FNPT, Ductile Iron
-
BrandGeneric
-
Manufacturer Part Number66011
-
CountryUSA
-
UPC822353031971
-
MaterialDuctile Iron
-
Pressure Rating150 psi
-
TypeTwo Lug
-
Nominal Size3/4 in
-
Hex Size3/8 in
-
SeriesFE
-
Dimensions2-1/2 in W
-
Domestic/ImportImport
-
Length2-1/2 in
-
End StyleFNPT
-
Temperature Rating70 deg F
-
FinishZinc Plated
- Use of supplied safety clip guarantees the fittings are properly connected because the safety pin will not go through the holes in mating fittings until couplings are locked in place
- Air king meets pressure requirements as specified in A-A-59553 commercial item description superseding mil Spec.WWC-633D
- Supplied with rubber washer, part no AWR4
- Rubber seal
- Never use any air king coupling for steam service!
- The use of an air king safety clip or wire type retainer is necessary to ensure air king universal couplings will not become accidentally disconnected
- To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose
- 150 psi at ambient temperature 70 deg F
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | DAM8 |
| Ferguson | DAM8 |
| Ferguson | DAM8 |
-
UNSPSC40141734
-
Package Description1/PK
-
Standards/ApprovalsPROP65:This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm
-
Catalog
-
Specification Sheet
Recently Viewed
HCI Preferred Supplier 66011 Hose End, 3/4 in, FNPT, Ductile Iron
3/8" -FEMALE PIPE THREAD STAINLESS STEEL 90 DEGREE ELBOW-FIT3/8SSE >
10-HP 3-PHASE 215-TC 1800-RPM MOTOR - BLDCESSWDM3714T>
3/8" X 3/8" BRASS FEMALE UNION-JWH431492 >
Browning® 3208279 Type SK Q-D® Bushing, 38 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208279 Type SK Q-D® Bushing, 38 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Starrett® 248D Extra Long Drive Pin Punch, 5/16 in, 8 in OAL, Steel
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 8mm (5/16") Diameter.
