NIBCO® 854-007 Loose Ring Flange, 3/4 in Nominal, PVC, Socket Connection, Domestic
NIBCO® 854-007 Loose Ring Flange, 3/4 in Nominal, PVC, Socket Connection, Domestic
-
BrandLasco®
-
UPC025528722296
-
Manufacturer Part Number854-007
-
CountryUSA
-
Temperature Rating73.4 deg F
-
MaterialPVC
-
Pressure Rating150 psi
-
TypeLoose Ring
-
Connection TypeSocket
-
Schedule RatingSCH 80/XH
-
Nominal Size3/4 in
-
Domestic/ImportDomestic
- ASTM D-1784: Rigid PVC compounds and chlorinated PVC (CPVC) compounds
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40174000
-
Package Description5/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2464|ASTM D2467|ASTM F1970|ANSI B16.5|NSF Approved
-
WarrantyLimited
-
Catalog
-
Specification Sheet
Recently Viewed
NIBCO® 854-007 Loose Ring Flange, 3/4 in Nominal, PVC, Socket Connection, Domestic
NIBCO® 854-007 Loose Ring Flange, 3/4 in Nominal, PVC, Socket Connection, Domestic
60206 Buffing Wheel, Cotton, 2" Piece Buffing Wheel Set. Great For Polishing All Metals.
BUFFING WHEEL, COTTON, 2" PIECE BUFFING WHEEL SET. GREAT FOR POLISHING ALL METALS.-FOR60206 >
FLAP WHEEL 1/4" SHANK MOUNTED, FEATURING DURABLE, HIGH-GRADE ALUMINUM OXIDE COATING FOR AGGRESSIVE CLEANING AND REFINISHING ON MOST WOOD OR METAL SURFACES.-FOR60185 >
Alemite® 131266 Gasket, 1-1/16 in OD, For Use With 3942-B Centralized Oil Lubricator, Copper
Alemite® 131266 Gasket, 1-1/16 in OD, For Use With 3942-B Centralized Oil Lubricator, Copper
Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Square-D 30-AMP 2-POLE 120-VOLT CONTACTORS SQU 8910-DPA-32-V-02
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This two pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
