Krylon® Tough Coat® A03720007 Acrylic Enamel Spray Paint, 12 oz Container, Liquid Form, White, 20 to 25 sq-ft Coverage
Tough Coat® provides the ultimate in durability and protective finishes. This high solids formula ensures maximum coverage and performance. Tough Coat® acrylic Enamels features our exclusive EZ Touch® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high solids formula ensures maximum coverage and performance. Tough coat delivers the ultimate in protection, durability, high gloss and color retention.
-
BrandKrylon®
-
UPC075577937202
-
Manufacturer Part NumberA03720007
-
CountryUSA
-
Temperature Rating70 deg F
-
FinishFlat
-
Chemical CompositionPropane, Talc, n-Butyl Acetate, Butane, Titanium Dioxide, Light Aliphatic Hydrocarbon Solvent, Acetone, Xylene, Ethyl 3-Ethoxypropionate, Ethylbenzene, Unsaturated Fatty Acids
-
FormLiquid
-
ColorWhite
-
VOC Content0.65
-
Viscosity<20.5 cSt
-
Container Size12 oz
-
Container TypeAerosol Can
-
Coverage20 to 25 sq-ft
-
pH Range7
- Tough, protective coating resists chipping and peeling
- Dries to Touch® in 15 min
- VOC/MIR compliant
- 24 months shelf life
- -20.2 deg F flash point
- Film degration, loss of gloss and staining gas resistance
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 54TJ41 |
-
Alternative Part NumberS03720
-
UNSPSC31211501
-
Package Description12/PK
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
SDS
-
Specification Sheet
Recently Viewed
Krylon® Tough Coat® A03720007 Acrylic Enamel Spray Paint, 12 oz Container, Liquid Form, White, 20 to 25 sq-ft Coverage
Tough Coat® provides the ultimate in durability and protective finishes. This high solids formula ensures maximum coverage and performance. Tough Coat® acrylic Enamels features our exclusive EZ Touch® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high solids formula ensures maximum coverage and performance. Tough coat delivers the ultimate in protection, durability, high gloss and color retention.
Browning® Classical Gripbelt® 1009695 TC Series Arm Type 16 Single Groove Sheave, Split Taper Bore, 3/4 to 2-11/16 in Dia Bore, 10 in OD, 10 in Dia Pitch, 1-1/4 in W Face
Browning® Classical Gripbelt® 1009695 TC Series Arm Type 16 Single Groove Sheave, Split Taper Bore, 3/4 to 2-11/16 in Dia Bore, 10 in OD, 10 in Dia Pitch, 1-1/4 in W Face
COATED GLOVES-GREWA8301BL>
MCR Safety 3100M 3100 Premium Grade General Purpose Gloves, Driver, Gunn Cut/Straight Thumb Style, M, Cowhide Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Gray, Slip-On Cuff, Uncoated Coating, Resists: Abrasion, Unlined Lining
This glove gets the job done! these split leather gloves feature oak color or natural color leather. Characteristics include a good balance between abrasion-resistance, dexterity, durability and comfort.
Sealmaster® 550248 RFB Non-Expansion Round/Straight Bore Tapered Roller Bearing Unit, 1-11/16 in Dia Bore, 4-1/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 5-3/8 in OAL/Dia
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options as illustrated on the pages to follow.
10-OZ WHITE COTTON GLOVES-GREWA8133B >
