SEYMOUR HIGH SOLIDS FLAT BLACK SPRAY PAINT SEY 620-1433
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
-
BrandSEYMOUR®
-
UPC043281006804
-
Manufacturer Part Number620-1433
-
CountryUSA
-
Temperature Rating50 to 90 deg F
-
Chemical CompositionAcetone, Propane, Calcium Carbonate, n-Butane, Isobutyl Acetate, Naphtha, PM Acetate, Glycol Ether EP, Methyl Isobutyl Ketone, Methyl Propyl Ketone and Silicon Dioxide
-
FormAerosal Spray
-
ColorBlack
-
Container Size16 oz
-
Container TypeCan
-
Coverage18 sq-ft
-
SeriesMRO®
-
Curing Time10 min
-
Odor/ScentAromatic
-
UNSPSC31211507
-
Package Description6/CS
-
Specification Sheet
-
SDS
Recently Viewed
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
5" COARSE 60-GRIT ADHESIVE-BACKED SANDING DISC--4 PACK - JWH301345 >
7" X 7/8" 36-GRIT FIBER DISC-PEAFD7036X >
The quality of cutting and grinding wheels depends on several factors - the grain (size, shape and quality) determines how aggressive a wheel is. The right mix of bonding resins, additives and fiberglass reinforcement determines the wheel life. Metabo® cutting and grinding wheels are designed and manufactured in accordance with our most stringent specifications so that they, in combination with our power tools, achieve the best performance and productivity, saving time and money.
Minimum Number of Clips: A minimum of 3 clips must be applied to securely form a wire rope eye or termination loop. Torque Requirement: The nuts must be tightened evenly to a minimum torque of 95 ft-lbs to prevent cable slippage .Rope Turn-Back: You must allow for exactly 12 inches of cable turn-back from the base of the eye to ensure adequate length for clip placement. Efficiency Rating: Properly installed clips on 9/16" wire rope yield an 80% efficiency rating based on the catalog breaking strength of the wire rope.
ECONOMY CLEAR SAFETY GLASSES-AMS18832 >
