Rust-Oleum® 641402 641 System High Performance Paint Thinner, 1 gal, Liquid Form
Rust-Oleum® 641402 641 System High Performance Paint Thinner, 1 gal, Liquid Form
-
BrandRust-Oleum®
-
UPC020066064105
-
Manufacturer Part Number641402
-
CountryUSA
-
Chemical CompositionAliphatic Hydrocarbon Terpene Alcohol
-
FormLiquid
-
TypeHigh Performance
-
VOC Content758 g/L
-
Viscosity100 sus at 77 deg F
-
Container Size1 gal
-
Series641 System
-
Odor/ScentSolvent Like
- A blend of aliphatic hydrocarbons, terpenes and defoaming additives designed for thinning and clean up of high performance 7400 system 450 VOC alkyd enamels and high performance 8400 system food and beverage alkyd enamels
- 50 deg F flash point
- Applied through brush, roll and spray
- Solvent base
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5A261 |
| Grainger | 5A261 |
-
UNSPSC31211803
-
Package Description2/PK
-
SDS
Recently Viewed
Rust-Oleum® 641402 641 System High Performance Paint Thinner, 1 gal, Liquid Form
Rust-Oleum® 641402 641 System High Performance Paint Thinner, 1 gal, Liquid Form
Drillco 670A148D 6700A Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 72A104C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 55A128B 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
