Heat Resistant Coatings
Krylon® K01407777 Solvent Based High Heat Spray Paint, 12 oz Container, 20 sq-ft Coverage, 15 min Curing
Krylon® K01505777 Solvent Based High Heat Spray Paint, 12 oz Container, White, 20 sq-ft Coverage, 15 min Curing
Alkyd High Heat Coatings offer three levels of heat protection and will withstand continuous exposure to the temperatures in their posted range. General Purpose is designed for surfaces exposed to temperatures up to 400 deg F. Heavy Duty is designed for surfaces exposed to temperatures up to 800 deg F. High-Performance offers the highest level of heat protection for surfaces exposed to temperatures up to 1200 deg F. These products are self-priming can be applied directly to metal and prepared previously coated surfaces.
Alkyd High Heat Coatings offer three levels of heat protection and will withstand continuous exposure to the temperatures in their posted range. General Purpose is designed for surfaces exposed to temperatures up to 400 deg F. Heavy Duty is designed for surfaces exposed to temperatures up to 800 deg F. High-Performance offers the highest level of heat protection for surfaces exposed to temperatures up to 1200 deg F. These products are self-priming can be applied directly to metal and prepared previously coated surfaces.
Hard Hat 7715 and 7778 should be used on new, bare steel, blasted steel or light rusted steel surfaces or properly prepared painted substrates alike barbecue grills, fire place equipment, space heaters etc. Provides heat resistance up to 750 deg C (1380 deg F) dry heat (short term peak resistance) in sheltered or interior environments.
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Apex® EX-250-B Tighter Tolerance Hex Extension, 1/4 in Hex x Square Drive, 1.375 in OAL
Apex® EX-250-B Tighter Tolerance Hex Extension, 1/4 in Male Hex x Male Square Drive, 1.375 in OAL
United Abrasives-SAIT 23060 Thin High Speed Cut-Off Wheel, 3 in Dia x 1/8 in THK, 3/8 in Center Hole, A24R Grit, Aluminum Oxide Abrasive
MORSE® 11384 1340 General Purpose Jobber Length Drill Bit, #51 Drill - Wire, 0.067 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE C/Tool 3/16" 4-FL SOLID CARBIDE ENDMILLS MCT 59004
MORSE® 59004 5968 Center Cutting High Performance Regular Length Single End End Mill, 3/16 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, Bright
ISOSTATIC™ Oilube® 401293 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 2 in W
ISOSTATIC™ Oilube® 401293 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 2 in W
