Rust-Oleum WHITE UP/DOWN WATER/BS SPRAY PAINT RUS 203039
Rust-Oleum Industrial Choice M1800 System Precision Line Inverted Marking Spray Paint features a fast-drying, water-based formula that creates bold, durable marks for a variety of industries including construction, excavation, surveying, landscaping, utility and more.
-
BrandRust-Oleum®
-
UPC020066112776
-
Manufacturer Part Number203039
-
CountryUSA
-
Temperature Rating50 to 100 deg F
-
FinishMatte
-
Chemical CompositionLiquefied Petroleum Gas, Aliphatic Hydrocarbon Limestone, Ethylbenzene
-
FormLiquid
-
ColorWhite
-
TypePrecision Line Water Based
-
VOC Content552 g/L
-
Container Size17 oz
-
Container TypeAerosol Can
-
Coverage600 to 700 linear ft/gal with 1 in W Stripe
-
SeriesM1800
-
Odor/ScentSolvent Like
- Marks up to 250% more linear feet than other brands
- Resists early fading and chalking
- Adheres to hot surfaces and can be sprayed in the cold to 25 deg F
- Dries in less than 5 min
- Creates accurate, easy-to-read markings in bright, durable colors
- Features a precision-line spray tip for easy-to-read, bright and vivid markings
- Easy-to-use, spray-through cap guaranteed not to clog
- Virtually no overspray
- Use with Rust-Oleum marking wand or pistol
- 212 deg F dry heat resistance temperature
- 5 years shelf life
- 1.2 maximum value of MIR
- Ultra-crisp, long-lasting marks
- Dries in under 5 min
-
UNSPSC31211513
-
Package Description12/PK
-
SDS
Recently Viewed
Rust-Oleum Industrial Choice M1800 System Precision Line Inverted Marking Spray Paint features a fast-drying, water-based formula that creates bold, durable marks for a variety of industries including construction, excavation, surveying, landscaping, utility and more.
IDC Select® IDC F-60MM Finished Bore QD® Bushing, 60 mm Dia Bore, 4.437 in Dia Barrel, 6-5/8 in Dia Flange, 3-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
3 -FEMALE PIPE THREAD METAL STAINLESS STEEL COUPLING
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
JAST526016>
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
