Rust-Oleum HI-VIS YELLOW UP/DOWN SPRAY PAINT RUS 203025
Rust-Oleum Industrial Choice M1600 System Precision Line Inverted Marking Spray Paint features a fast-drying, solvent-based formula that creates bold, durable marks for a variety of industries including construction, excavation, surveying, landscaping, utility and more.
-
BrandIndustrial Choice®
-
UPC020066008543
-
Manufacturer Part Number203025V
-
CountryUSA
-
Temperature Rating40 to 90 deg F
-
FinishFlat
-
Chemical CompositionAcetone/Propane/Naphtha/Petroleum/Hydrotreated Light/Petroleum Resin/n-Butane/Titanium Dioxide/Xylenes/Hydrous Magnesium Silicate/n-Butyl Acetate/Dimethyl Carbonate/Ethylbenzene/Octane/n-Heptane/Zirconium Acetate
-
FormLiquid
-
ColorHigh Visibility Yellow
-
TypeSolvent Based
-
VOC Content532 g/L
-
Container Size17 oz
-
Container TypeAerosol
-
Coverage600 to 700 linear-ft
-
SeriesM1600 System
-
Odor/ScentSolvent Like
- Marking paint covers more linear feet per can than other brands
- Precision tip results in virtually no overspray
- Adheres to hot surfaces, can be sprayed in the cold (to 25 deg F)
- Apply using the Marking Pistol or Marking Wand
- Add clear, distinct markings on various surfaces including concrete, pavement, grass, gravel and more
- Excellent resistance to early fading and chalking
- Easy-to-use, spray-through cap guaranteed not to clog
- Virtually no overspray
- Use with Rust-Oleum marking wand or pistol
- 212 deg F dry heat resistance temperature
- 5 years shelf life
- 1.2 maximum MIR lead time days
- Ultra-crisp, long-lasting marks
-
UNSPSC31211513
-
Package Description12/PK
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
-
Specification Sheet
Recently Viewed
Rust-Oleum Industrial Choice M1600 System Precision Line Inverted Marking Spray Paint features a fast-drying, solvent-based formula that creates bold, durable marks for a variety of industries including construction, excavation, surveying, landscaping, utility and more.
SP-343-2-S Industry Standard Clamping Collar, 2-Piece Construction, 3-7/16 in ID x 4-3/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
1/4" -SHANK WIRE CUP BRUSH-JWH345380 >
The M12™ HAMMERVAC™ Universal Dust Extractor is a universal solution for eliminating dust when drilling with any SDS Plus rotary hammer. It is the industry's only onboard universal dust extractor. The universal side handle allows for operation with any SDS Plus hammer in the industry: corded, cordless, Milwaukee Brand or other. The AUTOPULSE™ filter cleaning mechanism will clean the filter automatically after use, allowing for OSHA Table One Compliance. This extractor allows users to drill up to 8" in depth and up to 1-1/4" in diameter with two accessory nozzles designed for small and large diameters. The adjustable depth stop allows for quickly and accurately setting the desired hole depth. The dust box can be emptied with no exposure by hooking it up to a large dust extractor to vacuum out the dust. The tool also features an Auto On/Off Mode that saves time and battery life. The M12™ HAMMERVAC™ runs off of any Milwaukee M12™ REDLITHIUM™ Battery to be a fully self-powered unit.
Jones Stephens™ D06750 Dielectric Union, 3/4 in, MNPT x Solder, Forged Steel, Domestic
