Krylon® A03923004 Industrial Marking Paint, 17 oz Container, APWA Black, 10 to 15 min Curing
Krylon® A03923004 Industrial Marking Paint, 17 oz Container, APWA Black, 10 to 15 min Curing
-
BrandKrylon®
-
Manufacturer Part NumberA03923004
-
CountryUSA
-
ColorAPWA Black
-
TypeIndustrial
-
Container Size17 oz
-
Container TypeCan
-
Curing Time10 to 15 min
- High-solids formulation for bold, bright, visible markings
- Fast-drying formula penetrates and adheres to hot and cold surfaces
- Convenient Spray-Thru cap
- Non-clogging spray tip
Recently Viewed
Krylon® A03923004 Industrial Marking Paint, 17 oz Container, APWA Black, 10 to 15 min Curing
Krylon® A03923004 Industrial Marking Paint, 17 oz Container, APWA Black, 10 to 15 min Curing
Schneider Electric Square D™ TeSys™ D LC1D12BD Direct On-Line Standard IEC Contactor, 690 V AC, 24/300 V DC V Coil, 12/25 A, 3NO Contact, 3 Poles
TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3/3e (5.5kW@400V). They can be used to create motor starters for almost any type of application. It provides a 24V DC coil with transient suppressor module, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
Square D D321NCP Single Throw Safety Switch, 240 V AC, 30 A, 1.5 hp 240 V at AC 60 Hz, 3 hp 240 V at AC 60 Hz, 3 hp 240 V at AC 60 Hz, 7.5 hp 240 V at AC 60 Hz, 3 poles
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a fusible disconnect and has a rated current of 30A for 240VAC. This general duty switch has a 4 wire configuration with 3 poles and a factory installed neutral. The device accepts H, K or R fuse types. The enclosure is surface mounted and is a Type 1. This product has consumer packaging. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
