4-KW-38 4" X 3/8" Nap Roller
4" X 3/8" NAP ROLLER COVER-GRI4KW38>
Recently Viewed
4" X 3/8" NAP ROLLER COVER-GRI4KW38>
Jacobs® 7347DN Spindle Drill Chuck Arbor, #2 MT Mount Taper, Threaded Shank
Jacobs® 7347DN Spindle Drill Chuck Arbor, #2 MT Mount Taper, Threaded Shank
MORSE® 96134 4550G Center Cutting Regular Length Single End End Mill, 1 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4-1/8 in OAL, TiN Coated
ISOSTATIC™ Oilube® 401325 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-1/4 in OD, 3/4 in W
ISOSTATIC™ Oilube® 401325 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-1/4 in OD, 3/4 in W
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. A matching high shoulder is often on the opposite side of the inner ring as well. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. This ball bearing has a 40 deg contact angle. This bearing has a stamped steel cage and is not available with seals or shields. These bearings are non-separable. These bearings have normal tolerances and are not suitable for mounting adjacent to each other to achieve a preload.
Morse® 177139 MHS Advanced Hole Saw, 13/16 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 1/2-20 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.
