780532 DO-IT-BEST/BEST LOOK GENERAL PURPOSE 2" FLAT POLYESTER PAINT BRUSH
THIS GENERAL-PURPOSE FLAT 4.5 POLYESTER BRUSH IS IDEAL FOR ALL TASKS. GENERAL PURPOSE PAINT BRUSH FEATURES A SOLID WOOD HANDLE, BRASS FERRULE, WOOD PLUGS AND POLYESTER FILAMENT WITH CHISELED TRIM.
-JWH780532 >
Recently Viewed
THIS GENERAL-PURPOSE FLAT 4.5 POLYESTER BRUSH IS IDEAL FOR ALL TASKS. GENERAL PURPOSE PAINT BRUSH FEATURES A SOLID WOOD HANDLE, BRASS FERRULE, WOOD PLUGS AND POLYESTER FILAMENT WITH CHISELED TRIM.
-JWH780532 >
6" BLACK CABLE TIES 18-LB--BAG OF 100-CTE618UV100 >
4-1/2" X 7/8" COARSE FLAP DISCS-SAI40000>
10-MM X 1.00X25-MM HEX HEAD CAPSCREW-MET96010025UF >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
1/2" -ID LOW PILLOW BLOCK UNIT-BRWVPLE108 >
