771771 DO-IT-BEST/HWI PRODUCTS
2-1/2" FLAT TRIM PAINT BRUSH-JWH771771>
Recently Viewed
2-1/2" FLAT TRIM PAINT BRUSH-JWH771771>
Dichtomatik 75102028 O-Ring, 033 Dash Number, 1.989 in ID x 2.129 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1-1/2" PAINT BRUSH-JWH780541 >
Climax G2SC-243-SS Industry Standard Clamping Collar, 2-Piece Construction, 2-7/16 in ID x 3-1/2 in OD x 3/4 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Milwaukee® 5223 Straight Die Grinder, 5 in Dia Wheel, 7000 rpm Speed, 120 VAC/VDC, For Wheel: Type 5, Trigger Lock Switch
A coated spindle housing make this heavy duty, Milwaukee® straight grinder comfortable to hold on to while delivering a full 12 A of power and 7000 rpm this tool can accept up to 5 in resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces as well as buffing wheels for polishing surfaces. An impact absorbing tool rest is provided so that the tool can be set down safely as the wheel coasts to a stop. The spindle is 5/8 in for use with industry standard accessories for the rated diameter capacity.
CH-240 CIRCUIT BREAKER-JWH523954 >
