Dupli-Color® EDE160107 Engine Enamel With Ceramic™, 12 oz Container, Liquid Form, Ford Blue
Dupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation, gloss retention and protection from automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500 deg F intermittently and produces a superior finish that will not blister, flake, crack or peel.
-
BrandDupli-Color®
-
UPC026916916013
-
Manufacturer Part NumberEDE160107
-
CountryUSA
-
Temperature Rating60 to 92 deg F
-
FinishHigh Gloss
-
Chemical CompositionAcetone, Toluene, Propane, Butane, Methyl Ethyl Ketoxime, Titanium Dioxide
-
FormLiquid
-
ColorFord Blue
-
VOC Content0.5743
-
Viscosity<20.5 cSt
-
Container Size12 oz
-
Container TypeAerosol Can
- Features EZ Touch® conical nozzle
- Maximum heat dissipation and high gloss retention
- Ceramic resins resist heat up to 500 deg F
- Resistant to oil and other automotive fluids
- Will not blister, flake, crack or peel
- Dupli-Color® engine enamel will perform to the most rigorous standards of racing, street rod and vehicle restoration enthusiasts
- 0.75 specific gravity
- -20.2 deg F flash point
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0601926 |
-
UNSPSC31211501
-
Package Description6/PK
-
Standards/ApprovalsOSHA 29 CFR 1910.1200|NIOSH Approved|SARA 313
-
SDS
-
Instruction/Installation Manual
Recently Viewed
Dupli-Color® EDE160107 Engine Enamel With Ceramic™, 12 oz Container, Liquid Form, Ford Blue
Dupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation, gloss retention and protection from automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500 deg F intermittently and produces a superior finish that will not blister, flake, crack or peel.
Browning® 767625 VPS 200 Normal Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-23/32 to 4-17/32 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
3/8" X 8" BLACK PIPE NIPPLE-JPW3/8X8BN>
Gates® Power Transmission Polyflex® 3M530 Light Duty V-Belt, 3M Section, 1/8 in W Top, 20.87 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
1/2" CLOSE SCHEDULE 80 BLACK NIPPLE-FIT1/2XCLXHBN >
3/8" X 1-1/2" GALVANIZED NIPPLES-JPW3/8X11/2GN>
