SHRINKWRAP-18HD DO-IT-BEST/HWI PRODUCTS
18" X 1000' X 120-GAUGE STRETCH FILM - JWHSHRINKWRAP18HD >
Recently Viewed
18" X 1000' X 120-GAUGE STRETCH FILM - JWHSHRINKWRAP18HD >
IKO PILLOBALL PHSB8 Inch Series Insert/Lubrication Type Rod End, 1/2 in Dia Bore, 1.312 in OD, 3/4 in W, 14800 N Dynamic/36200 N Static Load
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
ORECION 15475--RECTANGULAR TYPE 12" LENGTH, 5/8" WIDTH, 3/8" THICKNESS. STEEL MATERIAL, ZINC PLATED FINISH
KEYSTOCK, RECTANGULAR TYPE, SEEL MATERIAL; ZINC PLATED FINISH; USED FOR NEW MACHINERY, GENERAL MAINTENANCE AND SHOP REPAIR
-PRC15475 >
Flex-Hone® GBD50018 Heavy Duty Flexible Cylinder Hone, 5 in Dia Bore, 6 in L Abrasive, 17-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
MORSE® 21564 1655D Dowel Pin Chucking Reamer, 0.187 in Dia x 4-1/2 in OAL, 0.1805 in Dia Straight Shank, Straight Flute
MORSE® 21564 1655D Dowel Pin Chucking Reamer, 0.187 in Dia x 4-1/2 in OAL, 0.1805 in Dia Straight Shank, Straight Flute
Dichtomatik N70450 O-Ring, 450 Dash Number, 10.475 in ID x 11.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
