Campbell® T7670409 Wire Rope Clip, 1/16 in Cable, Malleable Iron
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418192586
-
Manufacturer Part NumberT7670409
-
CountryUSA|Canada
-
Cable Size1/16 in
-
FinishElectro-Galvanized
-
MaterialMalleable Iron
- If Used on Coated Cable, Remove the Coating From the Assembly Area
- If Used on Coated Cable, Remove the Coating From the Assembly Area
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 24G234 |
| MSC | 97014369 |
-
UNSPSC31162813
-
Package DescriptionEACH
-
WarrantyLifetime Limited
-
Catalog
Recently Viewed
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Browning® PD9310 2-Hole Screw Conveyor Drive Shaft, 1-1/2 in Dia, 6 in OAL, For Use With TorqTaper® Plus 5:1, 9:1, 15:1, 25:1 and 35:1 Ratio, SMTP Size 203 Shaft Mount Speed Reducer, Steel
WATTS® 0590722 FV-4 Automatic Air Vent Valve, 1/2 in Nominal, NPT End Style, 1.45 to 150 psi Pressure, Brass Body, Import
This 1/2 inch automatic vent valve is used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with female NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. It has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. It can be disassembled for inspection and cleaning. The maximum pressure is 150 psi (10 bar).
NIBCO® N001166 TI-8 Gate Valve, 1/2 in Nominal, FNPT End Style, Brass Body, Handwheel Actuator, Import
The solid wedge, integral seats and bi-directional service make the gate valve a good choice for irrigation services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in light commercial and residential applications. The gate valve is backed by the NIBCO 2-year limited warranty.
Milwaukee® 48-62-3090 Asphalt Cutter, For Use With 5337-21 Demolition Hammer, 5 in W Head, 16-1/2 in OAL, 3/4 in Hex Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
EATON CH290 Type CH Standard Circuit Breaker, 120/240 V AC, 90 A, 10 kA Interrupt, 2 Poles
Eaton's residential CH circuit breakers provide premium overload protection. The Type CH circuit breakers trip to the OFF position, eliminating nuisance callbacks. The CHF family also includes a trip flag to differentiate between a trip and the breaker being turned off. The thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions. Multiple breakers have an internal common trip connection to operate all poles simultaneously. Handles are marked with ON-OFF indication and ampere rating of the breaker.
