Crosby® 1010596 Fist Grip® G-429-7/8 Wire Rope Clip, 7/8 in, Forged Steel, 4 Clips, 26 in Rope Turn Back
Crosby® 1010596 Fist Grip® G-429 Wire Rope Clip, 7/8 in, Forged Steel, 4 Clips, 26 in Rope Turn Back
-
BrandCrosby®
-
UPC662547105961
-
Manufacturer Part Number1010596
-
CountryUSA
-
Cable Size7/8 in
-
FinishGalvanized
-
MaterialForged Steel
-
Minimum Number of Clips4
-
Minimum Torque225 ft-lb
-
Rope Turn Back26 in
-
SeriesFist Grip® G-429
- Entire clip is galvanized to resist corrosive and rusting action
- Based on the catalog breaking strength of wire rope
- Crosby® Wire rope clips have an efficiency rating of 80 % for 5 to 22 mm sizes and 90% for sizes 24 to 40 mm
- Bolts are an integral part of the saddle
- Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation
- All sizes have forged steel saddles
- All clips are individually bagged or tagged with proper application instructions and warning information
- Assembled with standard heavy hex nuts
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP38 |
-
UNSPSC31162813
-
Package Description25/PK
-
Standards/ApprovalsASME B30.26|Federal Spec FF-C-450 Type III Class 1
-
Catalog
Recently Viewed
Crosby® 1010596 Fist Grip® G-429-7/8 Wire Rope Clip, 7/8 in, Forged Steel, 4 Clips, 26 in Rope Turn Back
Crosby® 1010596 Fist Grip® G-429 Wire Rope Clip, 7/8 in, Forged Steel, 4 Clips, 26 in Rope Turn Back
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Milwaukee® 49-56-6950 Small Thread Hole Saw Arbor, Up to 1-3/16 in Arbor, 1/4 in, Hardened Steel
Milwaukee® hole saw arbors are made from hardened carbon steel and alloy steel for greater durability. The 49-56-6950 arbor drives from the 3-flat shank of the pilot bit, which won't slip in the chuck.
MEDIUM INDUSTRY GRADE DOUBLE LEATHER PALM AND FINGERS GLOVES - GLV32113DPM>
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
