Crosby® 1010514 Fist Grip® G-429-3/8 Wire Rope Clip, 3/8 in, Forged Steel, 2 Clips, 5-1/4 in Rope Turn Back
Crosby® 1010514 Fist Grip® G-429 Wire Rope Clip, 3/8 in, Forged Steel, 2 Clips, 5-1/4 in Rope Turn Back
-
BrandCrosby®
-
UPC662547105145
-
Manufacturer Part Number1010514
-
CountryUSA
-
Cable Size3/8 in
-
FinishGalvanized
-
MaterialForged Steel
-
Minimum Number of Clips2
-
Minimum Torque45 ft-lb
-
Rope Turn Back5-1/4 in
-
SeriesFist Grip® G-429
- Entire clip is galvanized to resist corrosive and rusting action
- Based on the catalog breaking strength of wire rope
- Crosby® Wire rope clips have an efficiency rating of 80 % for 5 to 22 mm sizes and 90% for sizes 24 to 40 mm
- Bolts are an integral part of the saddle
- Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation
- All sizes have forged steel saddles
- All clips are individually bagged or tagged with proper application instructions and warning information
- Assembled with standard heavy hex nuts
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP34 |
-
UNSPSC31162813
-
Package Description50/PK
-
Standards/ApprovalsASME B30.26|Federal Spec FF-C-450 Type III Class 1
-
Catalog
Recently Viewed
Crosby® 1010514 Fist Grip® G-429-3/8 Wire Rope Clip, 3/8 in, Forged Steel, 2 Clips, 5-1/4 in Rope Turn Back
Crosby® 1010514 Fist Grip® G-429 Wire Rope Clip, 3/8 in, Forged Steel, 2 Clips, 5-1/4 in Rope Turn Back
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
3/8"-ISO-B 3/8"-NPTF STEEL NIPPLES-DXNH3F3E>
Milwaukee® 48-08-0260 Portable Band Saw Table, For Use With 6225, 6230 and 6230N Band Saw, 24 in H x 12-19/50 in W x 7 in D
Converts Milwaukee's portable band saws to stationary units. Can be mounted on a work bench or used on the job with 3/4 in. diameter pipe for legs (not included). Heavy duty clamping chain and crank nut easily secures all shapes of material. DOES NOT COME WITH the 3/4 in. pipe legs.
YR-2-1/4-X 2-1/4" Sealed Yoke Cam Follower
2-1/4" SEALED YOKE CAM FOLLOWER - SMIYR21/4X>
3/8" -MPT;FEMALE PIPE THREAD GALVANIZED STREET ELBOW-FIT3/8GSTE >

