Crosby® 1010676 Fist Grip® G-429-13/8 Wire Rope Clip, 1-3/8 to 1-1/2 in, Forged Steel, 5 Clips, 78 in Rope Turn Back
Crosby® 1010676 Fist Grip® G-429 Wire Rope Clip, 1-3/8 to 1-1/2 in, Forged Steel, 5 Clips, 78 in Rope Turn Back
-
BrandCrosby®
-
UPC662547106760
-
Manufacturer Part Number1010676
-
CountryUSA
-
Cable Size1-3/8 to 1-1/2 in
-
FinishGalvanized
-
MaterialForged Steel
-
Minimum Number of Clips5
-
Minimum Torque500 ft-lb
-
Rope Turn Back78 in
-
SeriesFist Grip® G-429
- Entire clip is galvanized to resist corrosive and rusting action
- Based on the catalog breaking strength of wire rope
- Crosby® Wire rope clips have an efficiency rating of 80 % for 5 to 22 mm sizes and 90% for sizes 24 to 40 mm
- Bolts are an integral part of the saddle
- Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation
- All sizes have forged steel saddles
- All clips are individually bagged or tagged with proper application instructions and warning information
- Assembled with standard heavy hex nuts
-
UNSPSC31162813
-
Package Description10/PK
-
Standards/ApprovalsASME B30.26|Federal Spec FF-C-450 Type III Class 1
-
Catalog
Recently Viewed
Crosby® 1010676 Fist Grip® G-429-13/8 Wire Rope Clip, 1-3/8 to 1-1/2 in, Forged Steel, 5 Clips, 78 in Rope Turn Back
Crosby® 1010676 Fist Grip® G-429 Wire Rope Clip, 1-3/8 to 1-1/2 in, Forged Steel, 5 Clips, 78 in Rope Turn Back
Extra reach for hard to reach grease fittings, Snaps directly onto a jaw-type coupler to reach grease fittings in very tight spaces, Works best with the LockNLube Grease Coupler, Delivers a fine line of grease for shafts and other applications, For hand operated grease guns, Choose your size LNL122 Narrow Needle Greasing Adapter Overall Length: 3.125 in or 80 mm, LNL222 XL Narrow Needle Greasing Adapter Overall Length: 7.5 in or 190.5 mm
ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 V AC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 VAC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
Browning 1-3/4"-ID 4-BOLT TRB FLANGE UNITS BRW FBE-920 X 1-3/4
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Working Load Limit (WLL): 5,200 lbs (2.6 tons) for secure, in-line pulls. Material: Forged carbon steel, which is quenched and tempered for high structural reliability. Coating: Hot-dip galvanized finish providing robust environmental and rust resistance. Threading: Standard unified coarse threading (UNC). Hardware Included: Shipped complete with a matching, hot-dip galvanized hex nut.
The 3401 Industrial Connector delivers a secure, vibration‑resistant seal for compressed air systems. Built for durability and long service life, it helps prevent leaks in demanding industrial and pneumatic applications.
