Crosby® 1010319 Red-U-Bolt® G-450-1 1/2, Wire Rope Clip, 1-1/2 in, Steel, 8 Clips, 54 in Rope Turn Back
Crosby® 1010319 Red-U-Bolt® G-450 Wire Rope Clip, 1-1/2 in, Steel, 8 Clips, 54 in Rope Turn Back
-
BrandCrosby®
-
Manufacturer Part Number1010319
-
CountryUSA
-
Cable Size1-1/2 in
-
FinishGalvanized
-
MaterialSteel
-
Minimum Number of Clips8
-
Minimum Torque360 ft-lb
-
Rope Turn Back54 in
-
SeriesRed-U-Bolt® G-450
- Each base has a product identification code (PIC) for material traceability, the name Crosby® or CG and a size forged into it
- Based on the catalog breaking strength of wire rope, Crosby® wire rope clips have an efficiency rating of 80% for 1/8 - 7/8 in sizes and 90% for sizes 1 in through 3-1/2 in
- entire clip is galvanized to resist corrosive and rusting action
- All clips are individually bagged or tagged with proper application instructions and warning information
- Clip sizes up through 1-1/2 in have rolled threads
- Look for the Red-U-Bolt®, your assurance of genuine Crosby® clips
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP31 |
-
UNSPSC31162813
-
Package Description10/PK
-
Standards/ApprovalsASME B30.26|FF-C-450 Type 1 Class 1
-
Catalog
Recently Viewed
Crosby® 1010319 Red-U-Bolt® G-450-1 1/2, Wire Rope Clip, 1-1/2 in, Steel, 8 Clips, 54 in Rope Turn Back
Crosby® 1010319 Red-U-Bolt® G-450 Wire Rope Clip, 1-1/2 in, Steel, 8 Clips, 54 in Rope Turn Back
Channellock® 3610 XLT™ Round Nose Linesman's Cutting Plier, 1.82 in L, 10-1/2 in OAL
Channellock® revolutionized linemen's pliers with the added benefit of Xtreme leverage technology (XLT™) XLT™ positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs. The combination of XLT™, laser heat treated cutting edges and its unique heavy duty enclosed joint design makes this tool a must have for any toolbox.
6 x 12 in Assortment contains 1 each of the following thicknesses: 0.001 in, 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.006 in, 0.007 in, 0.008 in, 0.01 in, 0.012 in, 0.015 in, 0.02 in, 0.025 in and 0.031 in. Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
United Abrasives-SAIT 09560 Wide Face Wheel Brush, 10 in Dia Brush, 1 in W Face, 0.014 in Dia Crimped Filament/Wire, 3/4 in Arbor Hole
Lincoln® 91108 Grease Filler Nipple, 1/8 inch Thread Size, NPT Thread Type
Lincoln® 91108 Grease Filler Nipple, 1/8 inch Thread Size, NPT Thread Type
WATER PUMP LUBE AND ANTI RUST-RADC1012 >
