Crosby® 1016395 G-403-1/4 Jaw End Swivel, 850 lb Load, 1/4 in Trade, Forged Steel, 0.69 in, 0.88 in x 0.75 in, 0.47 in Eye
Crosby® 1016395 G-403 Jaw End Swivel, 850 lb Load, 1/4 in Trade, Forged Steel, 0.69 in, 0.88 in x 0.75 in, 0.47 in Eye
-
BrandCrosby®
-
UPC662547163954
-
Manufacturer Part Number1016395
-
CountryUSA
-
Load Capacity850 lb
-
FinishHot Dipped Galvanized
-
MaterialForged Steel
-
Trade Size1/4 in
-
TypeJaw End
-
Width Between Eyes2.63 in
-
SeriesG-403
-
Eye Length0.69 in, 0.88 in
-
Eye Width0.75 in, 0.47 in
-
UNSPSC20122800
-
Standards/ApprovalsASME B30.26|RR-C-271F|Type VII|Class 3 Federal Specified|CE Certified
-
Catalog
Recently Viewed
Crosby® 1016395 G-403-1/4 Jaw End Swivel, 850 lb Load, 1/4 in Trade, Forged Steel, 0.69 in, 0.88 in x 0.75 in, 0.47 in Eye
Crosby® 1016395 G-403 Jaw End Swivel, 850 lb Load, 1/4 in Trade, Forged Steel, 0.69 in, 0.88 in x 0.75 in, 0.47 in Eye
1-QT 30-W CONVENTIONAL MOTOR OIL - VAL159 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Crosby® 1043374 G-291-1/2-3-3/4 Eye Bolt With Regular Nut, 1/2 in, 3-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043374 G-291 Eye Bolt With Regular Nut, 1/2 in, 3-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
