Crosby® 1016590 G-403-1-1/2 Jaw End Swivel, 45200 lb Load, 1-1/2 in Trade, Forged Steel, 3.88 in, 4.44 in x 4 in, 2.88 in Eye
Crosby® 1016590 G-403 Jaw End Swivel, 45200 lb Load, 1-1/2 in Trade, Forged Steel, 3.88 in, 4.44 in x 4 in, 2.88 in Eye
-
BrandCrosby®
-
UPC662547165903
-
Manufacturer Part Number1016590
-
CountryUSA
-
Load Capacity45200 lb
-
FinishHot Dipped Galvanized
-
MaterialForged Steel
-
Trade Size1-1/2 in
-
TypeJaw End
-
Width Between Eyes14-1/4 in
-
SeriesG-403
-
Eye Length3.88 in, 4.44 in
-
Eye Width4 in, 2.88 in
-
UNSPSC20122800
-
Standards/ApprovalsASME B30.26|RR-C-271F|Type VII|Class 3 Federal Specified|CE Certified
-
Catalog
Recently Viewed
Crosby® 1016590 G-403-1-1/2 Jaw End Swivel, 45200 lb Load, 1-1/2 in Trade, Forged Steel, 3.88 in, 4.44 in x 4 in, 2.88 in Eye
Crosby® 1016590 G-403 Jaw End Swivel, 45200 lb Load, 1-1/2 in Trade, Forged Steel, 3.88 in, 4.44 in x 4 in, 2.88 in Eye
Alemite® 1644-B Straight Thread Forming Grease Fitting Zerk, 1/8 in PTF SAE Special Extra Short Thread, 9/16 in OAL, 15/64 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1644-B Straight Thread Forming Grease Fitting Zerk, 1/8 in PTF SAE Special Extra Short Thread, 9/16 in OAL, 15/64 in L Shank, Steel, Trivalent Zinc Plated
Midland Industries 80003 Dry Standard Gauge, 0 to 60 psi Pressure, 1/4 in Connection, 2 in Dia Dial
Midland Industries 80-003 Dry Standard Pressure Gauge, 0 to 60 psi, 1/4 in Connection, 2 in Dial
DIXON GL-125 Dry Standard Pressure Gauge, 0 to 100 psi, 1/4 in Connection, 2 in Dial
Midland Industries 80-004 Dry Standard Pressure Gauge, 0 to 100 psi, 1/4 in Connection, 2 in Dial
Reelcraft® 260648 Spring Arbor, For Use With 4000, 5000 and 5005 Series Spring Driven Hose Reels
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
