Crosby® 1037639 G-414-1/4 Extra Heavy Duty Thimble, 1/4 in, Steel, Hot Dipped Galvanized, For Use With Wire Rope
Crosby® 1037639 G-414 Extra Heavy Duty Thimble, 1/4 in, Steel, Hot Dipped Galvanized, For Use With Wire Rope
-
BrandCrosby®
-
UPC662547020080
-
Manufacturer Part Number1037639
-
CountryUSA
-
FinishHot Dipped Galvanized
-
MaterialSteel
-
TypeExtra Heavy Duty
-
SeriesG-414
-
Wire Rope Diameter1/4 in
-
Suitable For Use WithWire Rope
- Stainless steel recommended for more corrosive environments where greater protection is required
- Greater protection against wear and deformation of the wire rope eye
- Longer service life
-
UNSPSC53141603
-
Standards/ApprovalsEN13411-1:2002|Federal Spec FF-T-276b Type III
-
Catalog
Recently Viewed
Crosby® 1037639 G-414-1/4 Extra Heavy Duty Thimble, 1/4 in, Steel, Hot Dipped Galvanized, For Use With Wire Rope
Crosby® 1037639 G-414 Extra Heavy Duty Thimble, 1/4 in, Steel, Hot Dipped Galvanized, For Use With Wire Rope
Browning® 1304807 Replacement Disc, 3-3/4 in ID x 6-1/2 in OD, For Use With T65L Torque Limiter
Browning® 1304807 Replacement Disc, 3-3/4 in ID x 6-1/2 in OD, For Use With T65L Torque Limiter
WATTS® 0009821 LF263A 3-Way Small Pressure Regulator, 1/4 in Nominal, FNPT End Style, 300 psi Pressure, Brass Body
This 1/4 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, three-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 3 to 50 psi (0.2 to 3.4 bar) and is factory set at 15 psi (1.0 bar).
225-AMP FORKLIFT FUSES -EDIANN225 >
24-OZ MULTI-SURFACE CLEANER-ZEPR06601 >
Dodge® 241288, 1 1/4 TDT1 Twin-Tapered Bushing Assembly, 1-1/4 in ID, Ductile Iron
Dodge® 241288, 1 1/4 TDT1 Twin-Tapered Bushing Assembly, 1-1/4 in ID, Ductile Iron
