DL-2500-A GOLDENROD
#14800 WINCHES-GOLDL2500A>
Recently Viewed
#14800 WINCHES-GOLDL2500A>
6x.020x5/8-11 Carbon Steel Large Cup Brush Nut Inside KNOT Wire
HellermannTyton T50L9C2 Standard Cable Tie, 15.35 in L x 0.18 in W x 1.2 mm THK, Polyamide 6.6, Natural
Engineered and manufactured for maximum performance and quality.
Cherne® Test-Ball® 270024 Pneumatic Pipe Plug, 2 in Pipe, 13 psi Working, Natural Rubber
Cherne® Single-Size Test-Ball® Plugs are expandable rubber test plugs designed to test drain, vent and waste systems in every type of pipe. Utilizing a standard tire air fitting for easy connections, its inflatable design can be inserted through a test tee to seal out-of-round pipe and hard-to-access openings. These plumbing test plugs are available in a variety of nominal sizes to accommodate your DWV testing needs. Cherne Industries is a global leader in pipe plug, blocking and testing.
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
Nice® ER20 ER Series Non-Fill Slot Precision Deep Groove Ball Bearing With Extended Inner Ring, 1-1/4 in Dia Bore, 2.835 in OD, 1 Rows, 1-11/16 in W, 5755 lb Load
