30234-Y AKRO MILS
15" X 6" X 5" YELLOW SHELF STORAGE BIN - AKR30234Y>
Recently Viewed
15" X 6" X 5" YELLOW SHELF STORAGE BIN - AKR30234Y>
2.5-MM X 35-MM METRIC O-RINGS-CUS2.5MM X 35MM >
1-1/2" X 3-19/30X1" 2" HOLE RIGID PIPE STRAP - STEEL-APLCF150 >
Littelfuse® POWR-GARD® 1304R1C5.5W Current Limiting Single Barrel Medium Voltage Fuse With Hook Eye, 130 A, 5.5 kV AC, 80 kA Interrupt, Class: R, Cartridge Body
R-rated fuses provide required short circuit protection for medium voltage motors, motor controllers and associated circuitry. These components have limited ability to absorb the energy of large short circuit currents. Medium voltage motor controllers contain overload relays which provide both overload protection and locked rotor protection to the motor. The controllers are also intended to interrupt low value short circuits within the capability of the motor controller. This protects the medium voltage fuse from sustained over currents which are less than their minimum interrupting rating. NEMA standards for R-rated medium voltage power fuses require that they operate within 15 to 35 s when subjected to an RMS current 100 times the R-rating.
The Milwaukee® SDS plus bits with 1/4 in. hex are designed specifically for Tapcon® screw applications. Built to take on brick, block, and concrete Milwaukee SDS bits feature 2-cutter geometry for fast drilling and debris removal. The patented, reinforced flute design increases impact resistance and transfers energy directly to the bit tip. Patented rebar chamfers withstand impact from rebar and hard aggregate, and reduce Carbide chipping. To be used with drive sleeve available in the SDS-Plus Tapcon® installation kit (48-20-7497). Tapcon® is a registered trademark of Illinois tool works Inc.
3/8" X 6" ZINC-PLATED EYEBOLT-NTL123539 >
