Quantum 4" X 5-3/8" X 3" BLACK STACK BINS QSS QUS-210-B
Ultra QUS210BK Heavy Duty Stack and Hang Bin, 5-3/8 in L x 4-1/8 in W x 3 in H, 0.03 cu-ft, Black
-
BrandQuantum®
-
UPC651588035658
-
Manufacturer Part NumberQUS210BK
-
CountryUSA
-
Load Capacity10 lb
-
MaterialInjection Molded Plastic
-
ColorBlack
-
TypeHeavy Duty
-
Use Divider NumberDUS210
-
Use Lid NumberCOV210
-
Volume Capacity0.03 cu-ft
-
SeriesQUS210
-
Number of Divider Slots Long1
-
Inside Height2-13/16 in
-
Inside Length4-3/4 in
-
Inside Width3-7/16 in
-
Outside Height3 in
-
Outside Length5-3/8 in
-
Outside Width4-1/8 in
- Back and side grips make it easy to handle
- Resistant to extreme cold
- Autoclavable up to 250 deg F, as well as being resistant to extreme cold
- Will not rust or corrode
- Can be hanged from rails or louvered panels thanks to molded-in rear hanglock
- Has wide stacking ledge and anti-slip lock
- Molded ID label slot
- Ultra stack and hang bin is made from strong and durable injection molded plastic
- It can be used to organize your inventory
- Built-in rear hanger allows bins to hang from louvered panels or rails
- Guaranteed not to break or crack under normal load conditions
-
UNSPSC24112003
-
Package Description24/CT
-
Standards/ApprovalsFDA Approved
-
WarrantyLifetime
-
Catalog
Recently Viewed
Ultra QUS210BK Heavy Duty Stack and Hang Bin, 5-3/8 in L x 4-1/8 in W x 3 in H, 0.03 cu-ft, Black
Irwin® 3043010 Ship Auger Bit, 13/16 in Dia, 17 in OAL, 12 in L Hollow Center Flute, 7/16 in Shank
Weldtec ship auger bit with single cutter and side lip is designed to bore holes in wood where nails may be encountered. Cuts through nails without damaging the bit. The hollow center flute clears chips quickly out of the hole. Ideal for applications where chip clogging can be a problem such as with green wood and creosoted poles. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. The 7-1/2-in length allows bit to be used in tight areas and the wide lands keep the bit straight as it bores through the hole. The medium-fast screw point is ideal for general wood boring applications.
7/8"-ID BRASS COMPRESSION SLEEVES
MORSE® 38025 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M18x1.5 Thread, D6 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
RIDGID® 48285 Bolt Die, 1-3/4 in Conduit/Pipe, 1-3/4-5 UNC Thread, Right Thread, For Use With 504A, 711, 811A, 815A, 816, 817 and 911 Universal Die Heads, HSS
RIDGID® 48285 Bolt Die, 1-3/4 in Conduit/Pipe, 1-3/4-5 UNC Thread, Right Thread, For Use With 504A, 711, 811A, 815A, 816, 817 and 911 Universal Die Heads, HSS
Fluke® T5-600-USA Electrical Tester Clamp Meter With Open Jaw, 100 A, 600 VAC, 50/60 Hz
Electrical tester with OpenJaw™ current, 600 VAC and 4 mm detachable probes. The Fluke® T5 electrical testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, Ohms or current and the tester does the rest. OpenJaw and trade, current lets you check current up to 100 A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making It easy to tote the T5 in your tool pouch. Detachable SlimReach and trade, test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
