Lift-All 2" X 96" 1-PLY E/E POLYESTER SLING LIF EE-1802-TF X 8
Lift-All® Tuff-Edge® III introduces a patented design with edge-cut resistance and increased abrasion. Easily inspect webbing with Edge Damage Limit (EDL) marker.
-
BrandLift-All®
-
UPC697886100049
-
Manufacturer Part NumberEE1802TFX8
-
CountryUSA
-
Temperature Range-60 to 200 deg F
-
MaterialPolyester
-
Choker Hitch Capacity2500 lb
-
CoatingLatex
-
ColorSilver
-
TypeFlat Eye and Type 3 Eye
-
Vertical Hitch Capacity3200 lb
-
Web GradeHeavy Duty
-
Width2 in
-
Number of Plys1
-
Basket Hitch Capacity3200 lb
-
Length8 ft
-
Eye Length10 in
- Edge damage limit (EDL) out-of-service marker
- The EDL marker tool both simplifies the inspection process and also extends the life of the web slings, saving you money
- TUFF-TAG™ provides serial numbered identification for traceability
- Web slings are light weight, flexible and have wide bearing surfaces to help protect the load
- Their stretch characteristics help to avoid shock loading problems
- Lighter weight and easier to use than chain or wire rope
- Daily use under good to rugged lifting conditions
- 2X better edge cut resistance
- Red core yarn warning system aids in the inspection process
- Silver colored web treatment fights abrasion for additional sling life
- Special polymer coated edge yarns improve edge cutting and abrasion to extend sling life
- Silver body, blue edges and blue center stripe
- Tuff-Edge® II web material is standard - Helps prevent sling damage
- Better load control and balance by using fixed fitting points and multiple legs
- Standard oblong links and hooks are forged from alloy steel for strength and reliability
- Endless type allows shifting of wear points
- Always protect synthetic slings from being cut by corners and edges
- Tubular edge design with damage-resistant core helps protect the body fibers from cutting, keeping the integrity of the sling intact without compromising its strength
- Easy to identify by the blue tubular edges and EDL marker
- See Sling Protection section in the Lift-All catalog
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | SE82EE1802T8 |
| Grainger | 1A598 |
| Fastenal | 0558610 |
-
UNSPSC24101611
-
Package DescriptionEACH
-
Standards/ApprovalsASME B30.9|OSHA 29 CFR 1910.184|WSTDA WS-1
-
WarrantyLimited Liability Warranty
-
Technical Bulletin
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Lift-All® Tuff-Edge® III introduces a patented design with edge-cut resistance and increased abrasion. Easily inspect webbing with Edge Damage Limit (EDL) marker.
GEARWRENCH® 9540N Non-Capstop Open End Regular Length Reversible Combination Wrench, 1 in Wrench, 12 Points, 15 deg Offset, 14 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
Hexagon Threading Dies are multi-edged, internally threaded tools used for cutting external threads. Hexagon dies are the same size as standard Hex Nuts.
8" HANDY FILES-NIC06601 >
DeWALT® DCR006 Cordless Bluetooth Speaker, 12 V, Li-Ion Battery, Tool Only
HF7325 by Coilhose | Hose Ferrules | 0.568" ID | 1" Length | Brass
