Lift-All 72" GREEN ENDLESS ROUND POLY SLING LIF EN-60 X 6
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
-
BrandLift-All®
-
UPC697886100650
-
Manufacturer Part NumberEN60X6
-
CountryUSA
-
Temperature Range-50 to 200 deg F
-
MaterialPolyester
-
Choker Hitch Capacity4200 lb
-
ResistsUV Sunlight, Grease and Most Acids
-
ColorGreen
-
TypeEndless
-
Vertical Hitch Capacity5300 lb
-
Width Under Load1-3/8 in
-
Diameter7/8 in
-
Basket Hitch Capacity10600 lb
-
Length6 ft
- Tuflexâ„¢ round sling is an endless synthetic sling made from a skein (continuous loop or hank) of polyester yarn covered by a double wall tubular jacket
- These durable and versatile endless slings will become your first choice for synthetic slings once you've tried them
- The round sling body can also be compared to sling webbing with the tubular jacket face yarns woven without binder yarns, this allows the core yarns to move independently within the jacket
- Low stretch (about 3 Percent at rated capacity)
- Maintains 100 Percent of original strength until jacket damage exposes core yarns
- When core yarns are visible, sling must be removed from service
- Chokes tighter, releases easier than other slings
- No strength loss from abrasion to cover
- Good for low headroom lifts
- Wear points can be shifted to extend sling life
- Light weight reduces fatigue and strain on riggers
- Replacement is not necessary until the red striped white core yarns can be seen through holes in the jacket
- Always protect synthetic slings from being cut by corners and edges
- See Sling Protection section in the Lift-All catalog
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 4A768 |
| MSC | 89673644 |
| Fastenal | 0558696 |
-
UNSPSC24101611
-
Package DescriptionEACH
-
Standards/ApprovalsASME B30.9|OSHA Compliant
-
WarrantyLimited Liability Warranty
-
Technical Bulletin
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
MORSE® 10941 1315 Extra Length Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 8 in OAL, HSS
Milwaukee® 49-57-0752 Tang Drive Annular Cutter, 3/4 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 3/4 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Browning® 1079045 Split Taper Bushing, 2-1/16 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
BLIND FLANGES-NIB1853060>
1-1/2X12-SS-N 1-1/2" -male Pipe Threadx12" Stainless Steel Nipples
1-1/2" -MALE PIPE THREADX12" STAINLESS STEEL NIPPLE-FIT11/2X12SSN >
