Lift-All® Tuflex™ EN30X20 Endless Round Sling, 20 ft L, 2600 lb, Polyester, Purple
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
-
BrandLift-All®
-
UPC697886163570
-
Manufacturer Part NumberEN30X20
-
CountryUSA
-
Temperature Range-60 to 200 deg F
-
MaterialPolyester
-
Choker Hitch Capacity2100 lb
-
ResistsUV Sunlight, Grease and Most Acids
-
ColorPurple
-
TypeEndless
-
Vertical Hitch Capacity2600 lb
-
Width Under Load1 in
-
Diameter5/8 in
-
Basket Hitch Capacity5200 lb
-
Length20 ft
- Tuflex™ round sling is an endless synthetic sling made from a skein (continuous loop or hank) of polyester yarn covered by a double wall tubular jacket
- These durable and versatile endless slings will become your first choice for synthetic slings once you've tried them
- The round sling body can also be compared to sling webbing with the tubular jacket face yarns woven without binder yarns, this allows the core yarns to move independently within the jacket
- Color coded capacities for quick identification
- TUFF-TAG™ provides serial numbered identification for traceability
- Low stretch (about 3 Percent at rated capacity)
- Maintains 100 Percent of original strength until jacket damage exposes core yarns
- When core yarns are visible, sling must be removed from service
- Chokes tighter, releases easier than other slings
- No strength loss from abrasion to cover
- Good for low headroom lifts
- Wear points can be shifted to extend sling life
- Light weight reduces fatigue and strain on riggers
- Replacement is not necessary until the red striped white core yarns can be seen through holes in the jacket
- Always protect synthetic slings from being cut by corners and edges
- See Sling Protection section in the Lift-All catalog
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 38Z350 |
-
UNSPSC24101611
-
Package DescriptionEACH
-
Standards/ApprovalsASME B30.9|OSHA Compliant
-
WarrantyLimited Liability Warranty
-
Technical Bulletin
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Lift-All® Tuflex™ EN30X20 Endless Round Sling, 20 ft L, 2600 lb, Polyester, Purple
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
Klein® 3262 Barrel Drift Pin, 1/2 in, 8 in OAL, Alloy Steel Tip
Klein Tools Barrel-Type Drift Pins are manufactured for durability. They are machined from quality alloy steel, which is forged and heat-treated for strength. The tough, drop-forged steel will properly end-pein in use.
GEARWRENCH® GearBox™ 85998 XL Series Extra Long Length Slim Double Box End Ratcheting Wrench Set, 9 Pieces, 5/16 to 3/4 in, Polished Chrome
GEARWRENCH 85998 9-piece XL Gear Box Double Box End SAE ratcheting wrench set consists of 1 of each 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" XL gear box ratcheting wrenches. Ratcheting box end need as little as 5-Degrees to move the fastener as opposed to 30 degrees for standard box end wrenches. The standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn, rusted fastener. The ratcheting box end then makes the loosening or tightening of the fastener fast and safe. The box end features improved box end strength from GEARWRENCH's Off-Corner Loading and at the same time, reduces fastener rounding. The double box end ratcheting wrenches are made from the finest chrome vanadium steel for precision long lasting tool life.
CF-7/8-S MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
7/8" SEALED CAM FOLLOWERS-MCGCF7/8S>
Gates® Power Transmission 8FP-8FP-8MP SAE to SAE Hydraulic Flange Tee, 1/2-14 Nominal, Female NPTF on Run x Male NPTF End Style, Steel
Gates® Power Transmission 8FP-8FP-8MP SAE to SAE Hydraulic Flange Tee, 1/2-14 Nominal, Female NPTF on Run x Male NPTF End Style, Steel
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
