Lift-All® Tuflex™ EN1000X12 Endless Round Sling, 12 ft L, 90000 lb, Nylon/Polyester, Black
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
-
BrandLift-All®
-
UPC697886638788
-
Manufacturer Part NumberEN1000X12
-
CountryUSA
-
Temperature Range-40 to 200 deg F
-
MaterialNylon/Polyester
-
Choker Hitch Capacity72000 lb
-
ResistsAbrasion, Cutting, Snags, Punctures, Missing/Illegible Tag, Heat/Chemical Burns and Knotting
-
ColorBlack
-
TypeEndless
-
Vertical Hitch Capacity90000 lb
-
Width Under Load5-1/4 in
-
Basket Hitch Capacity180000 lb
-
Length12 ft
- Tuflex™ round sling is an endless synthetic sling made from a skein (continuous loop or hank) of polyester yarn covered by a double wall tubular jacket
- These durable and versatile endless slings will become your first choice for synthetic slings once you've tried them
- The round sling body can also be compared to sling webbing with the tubular jacket face yarns woven without binder yarns, this allows the core yarns to move independently within the jacket
- Color coded capacities for quick identification
- TUFF-TAG™ provides serial numbered identification for traceability
- Low stretch (about 3 Percent at rated capacity)
- Maintains 100 Percent of original strength until jacket damage exposes core yarns
- When core yarns are visible, sling must be removed from service
- Chokes tighter, releases easier than other slings
- No strength loss from abrasion to cover
- Good for low headroom lifts
- Always protect synthetic slings from being cut by corners and edges
- The most versatile endless sling on the market
- Wear points can be shifted to extend sling life
- See Sling Protection section in the Lift-All catalog
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 38Z276 |
-
UNSPSC24101611
-
Package DescriptionEACH
-
Standards/ApprovalsASME B30.9|OSHA 29 CFR 1910.184|WSTDA RS-1|WSTDA RS-2
-
WarrantyLimited Liability Warranty
-
Technical Bulletin
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Lift-All® Tuflex™ EN1000X12 Endless Round Sling, 12 ft L, 90000 lb, Nylon/Polyester, Black
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
GEARWRENCH® 85599 Regular Length Combination Ratcheting Wrench Set, 8 Pieces, 5/16 to 3/4 in, Polished Chrome
The GEARWRENCH Open-End Ratcheting Wrenches make short work of tough jobs. These wrenches let you quickly ratchet nuts and bolts on or off without removing the wrench from the fastener. The open end has the dependable strength of a crows foot ratchet, while the ratcheting box-end works with just five degrees of swing arc to let you turn fasteners in low-access areas.
Edison ECNR.6 ECNR Current Limiting Time Delay Fuse, 0.6 A, 250 V AC/125 V DC, 200 kAIC Interrupt, Class: RK5
Edison's UL Class RK5 dual-element, time-delay fuses provide economical solutions to overcurrent protectioni. Available in both 250Vac and 600Vac, with 200kA RMS Sym interrupting ratings and sizes ranging from 0 to 600 amp.
ITM ST02512 Bit Screwdriver, #10 to #12 Point, 1 in OAL
Milwaukee® SHOCKWAVE™ 48-32-4855 Impact Power Bit, #SQ2 Square Point, 6 in OAL, Alloy76™ Steel
The MILWAUKEE® SHOCKWAVE™ Impact Duty 6" SQ2 Driver Bits provide the Ultimate Fit for a superior driving experience. The optimized SHOCKZONE™ shanks are customized per tip type to absorb peak torque and prevent breaking. The long-lasting Wear Guard™ Tip provides increased wear resistance, protecting the fit over the life of the bit. The customized tip geometry leads to less stripping of screws on the job site.
Wilton® 27204 O Series Extra Heavy Duty C-Clamp, 1-7/8 in D Throat, 3/4 to 2-3/8 in Clamping, 1/4 to 2 in Jaw Opening
Wilton® Brute Force™ bridge c-clamps are ideal for heavy construction and fabrication. Brute force c-clamps boast a drop forged frame, black oxide coating and clamping pressure ranging up to 40000 lbs. Spindles are full length, machined from a single piece of square, cold drawn steel tempered and hardened. Square spindle heads stand up to heavy wrench tightening.
