Lift-All 120" RED ENDLESS ROUND POLY SLINGS LIF EN-150 X 10
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
-
BrandLift-All®
-
UPC697886163952
-
Manufacturer Part NumberEN150X10
-
CountryUSA
-
Temperature Range-50 to 200 deg F
-
MaterialPolyester
-
Choker Hitch Capacity10600 lb
-
ResistsUV Sunlight, Grease and Most Acids
-
ColorRed
-
TypeEndless
-
Vertical Hitch Capacity13200 lb
-
Width Under Load2 in
-
Diameter1-3/8 in
-
Basket Hitch Capacity26400 lb
-
Length10 ft
- Tuflexâ„¢ round sling is an endless synthetic sling made from a skein (continuous loop or hank) of polyester yarn covered by a double wall tubular jacket
- These durable and versatile endless slings will become your first choice for synthetic slings once you've tried them
- The round sling body can also be compared to sling webbing with the tubular jacket face yarns woven without binder yarns, this allows the core yarns to move independently within the jacket
- Low stretch (about 3 Percent at rated capacity)
- Maintains 100 Percent of original strength until jacket damage exposes core yarns
- When core yarns are visible, sling must be removed from service
- Chokes tighter, releases easier than other slings
- No strength loss from abrasion to cover
- Good for low headroom lifts
- Wear points can be shifted to extend sling life
- Light weight reduces fatigue and strain on riggers
- Replacement is not necessary until the red striped white core yarns can be seen through holes in the jacket
- Always protect synthetic slings from being cut by corners and edges
- See Sling Protection section in the Lift-All catalog
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 3KN72 |
| MSC | 89673891 |
| Fastenal | 0558707 |
-
UNSPSC24101611
-
Package DescriptionEACH
-
Standards/ApprovalsASME B30.9|OSHA Compliant
-
WarrantyLimited Liability Warranty
-
Technical Bulletin
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Greenlee® 1981 Indentor Manual Crimping Tool, 8 AWG to 250 kcmil, 8 AWG to 4/0 kcmil
Greenlee® 1981 Indentor Manual Crimping Tool, 8 AWG to 250 kcmil, 8 AWG to 4/0 kcmil
Proto® J72901/4 Standard Length Socket Driver Bit, Imperial, 3/8 in, 1/4 in, 1-5/8 in L Bit
THE AB552048 HAS A WEIGHT CAPACITY OF 5500LBS, LENGTH OF 48" WITH OF 20.5". THE LOWER HEIGHT IS 2.9" WITH A RAISED HEIGHT OF 7.2". THE JACK WEIGHS 205 LBS IS POWDER COATED WITH A RUBBER COATED HANDLE. PUMP BYPASS ELIMINATES SEAL DAMAGE, HAS ENTRY & EXIT ROLLER, SOLID PUSH RODS, AND BUSHINGS AT PIVOT POINTS
-AARAB552048>
FLUORESCENT BULBS
