Crosby® 1021664 Wide Body Shackle, 7 ton Load, 2.1 in, 0.88 in Dia Screw Pin, Self-Colored
Crosby® 1021664 Wide Body Shackle, 7 ton Load, 2.1 in, 0.88 in Dia Screw Pin, Self-Colored
-
BrandCrosby®
-
Manufacturer Part Number1021664
-
CountryUSA
-
Load Capacity7 ton
-
FinishSelf-Colored
-
SeriesS-2169
-
Inner Length3.56 in
-
Inner Width2-1/2 in
-
Size2.1 in
-
Opening Size1-1/4 in
-
Body MaterialForged Alloy Steel
-
Overall Length5.87 in
-
Overall Width3.97 in
-
Eye Outer Size1.82 in
-
Pin Diameter0.88 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Individually proof tested and magnetic particle inspected Crosby® certification available at time of order
- Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsASME B30.26|CE Certified
-
Catalog
Recently Viewed
Crosby® 1021664 Wide Body Shackle, 7 ton Load, 2.1 in, 0.88 in Dia Screw Pin, Self-Colored
Crosby® 1021664 Wide Body Shackle, 7 ton Load, 2.1 in, 0.88 in Dia Screw Pin, Self-Colored
Drillco 350E004 3500E Imperial Plain Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Leviton® CR20 1-Phase Duplex Indented Face Self-Grounding Straight Blade Receptacle, 125 V AC, 20 A, 2 Poles, 3 Wires, Brown
Leviton® line of heavy duty specification grade receptacles are designed and manufactured to withstand the most demanding environments. These commercial grade devices are the electrical contractors choice for use in hotels, schools, hospitals and commercial office buildings.
Milwaukee® Steel Hawg® 49-59-0875 Annular Cutter, 7/8 in Dia Cutter, 1 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Plumb® 11423 Prospectors Hammer With Comfort Grip, 16 oz Forged Steel Head, 12-1/2 in OAL, Fiberglass Handle
Plumb® 11423 Prospectors Hammer With Comfort Grip, 16 oz Forged Steel Head, 12-1/2 in OAL, Fiberglass Handle
Proto® JSCV14T Reversible Spline Combination Wrench, 7/16 in, 12 Points, 15 deg Offset, 6-1/2 in OAL, Forged Steel, Full Polished, ASME Specified
