Crosby® 1019944, S-2150-1 1/2 Chain Shackle, 17 ton Load, 1-1/2 in, 1.66 in Dia Bolt Pin, Self-Colored
Crosby® 1019944 Chain Shackle, 17 ton Load, 1-1/2 in, 1.66 in Dia Bolt Pin, Self-Colored
-
BrandCrosby®
-
Manufacturer Part Number1019944
-
CountryUSA
-
Load Capacity17 ton
-
FinishSelf-Colored
-
SeriesS-2150
-
Inner Length4.87 in
-
Inner Width2-3/8 in
-
Size1-1/2 in
-
Opening Size2-3/8 in
-
Body MaterialCarbon Steel
-
Overall Length9.05 in
-
Overall Width7.73 in
-
Eye Outer Size3.62 in
-
Pin Diameter1.66 in
-
Pin MaterialAlloy
-
Pin TypeBolt
- Working load limit and grade 6 permanently shown on every shackle
- Approved for use at -40 to 400 deg F
- Meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds Certified|ABS 2007 Steel Vessel Rules 1-11-17.7|Federal Spec RR-C271F, Type IVB, Grade A, Class 3|ASME B30.26/EN13889:2003
-
Catalog
Recently Viewed
Crosby® 1019944 Chain Shackle, 17 ton Load, 1-1/2 in, 1.66 in Dia Bolt Pin, Self-Colored
Littelfuse® POWR-GARD® JTD060 Current Limiting Time Delay Fuse, 60 A, 600 V AC/300 V DC, 200/20 kA Interrupt, J Class, Cartridge Body
The Littelfuse® POWR-PRO® JTD_ID Indicator Class J fuse provides visual blown fuse indication and maximum protection in a compact package. The compact Class J package was designed specifically for circuits where space is at a premium. The current limiting time delay JTD_ID offers a patented true dual-element design that is ideal for use in circuits with high inrush currents. Superior performance characteristics of JTD_ID Indicator fuses reduce nuisance fuse opening and the blown fuse indication reduces downtime and increases safety.
Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.
MORSE® 13110 1333 General Purpose Jobber Length Drill Bit, 8 mm Drill - Metric, 0.315 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
2-3/8" -ID QUICK DISCONNECT E-STYLE BUSHING
Browning® 1080076 Type S1 Split-Taper Bushing, 2-3/16 in Dia Bore, 4.418 in Dia Small End/4-5/8 in Dia Large End Dia Barrel, 6-3/8 in Dia Flange, 4-3/8 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
