Crosby® 1018534, G-209-1, Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018534 Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018534
-
CountryUSA
-
Load Capacity8.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length3-3/4 in
-
Inner Width2.69 in
-
Size1 in
-
Opening Size1.69 in
-
Body MaterialCarbon Steel
-
Overall Length6.56 in
-
Overall Width5.13 in
-
Eye Outer Size2.38 in
-
Pin Diameter1.13 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 29WP67 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018534, G-209-1, Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018534 Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
Irwin® Record® 226303ZR Light Duty Portable Bench Vise, 2 in Jaw Opening, 3 in W Steel Jaw, 1-5/8 in D Throat
Irwin® Record® vises are built to handle any job. The impressive, versatile line of vises from Irwin® is designed with the most sought-after features to fit every application, from the garage workbench to the factory floor. Whether used for cutting, screwing, drilling, planning, sanding or just holding, there is an Irwin® Record® vise that's perfect for the any type of holding application. Designed and manufactured to the highest standards and built with the best available materials, Irwin® Record® vises are available in a variety of styles, jaw widths, jaw capacities, base types and clamping forces. Refer to the chart below to select the best vise for the job.
25' CLEAR TELEPHONE BASE CORD-JWH522694 >
12" X 1500' X 80-GAUGE STRETCH FILM--CASE OF 4 - JWHSTRETCHFILM8012 >
AA, AAA, C, D, 9V VALUE CHARGER-EVRCHM4FC >
THIS IS A MASONITE TOP GLUED TO A STEEL TOP
ALSO KNOWN AS A MASONITE OVER STEEL WORK TOP
