Crosby® 1018678, G209-2 1/2 Anchor Shackle, 55 ton Load, 2-1/2 in, 2-3/4 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018678 Anchor Shackle, 55 ton Load, 2-1/2 in, 2-3/4 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018678
-
CountryUSA
-
Load Capacity55 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length10-1/2 in
-
Inner Width7-1/4 in
-
Size2-1/2 in
-
Opening Size4.13 in
-
Body MaterialCarbon Steel
-
Overall Length17.84 in
-
Overall Width13 in
-
Eye Outer Size5.69 in
-
Pin Diameter2-3/4 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018678, G209-2 1/2 Anchor Shackle, 55 ton Load, 2-1/2 in, 2-3/4 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018678 Anchor Shackle, 55 ton Load, 2-1/2 in, 2-3/4 in Dia Screw Pin, Hot Dipped Galvanized
Hyde® 02300 Heavy Duty Putty Knife, 3-3/4 in L x 2 in W, High Carbon Steel Blade, Stiff Blade Flexibility
Hyde® 02300 Heavy Duty Putty Knife, 3-3/4 in L x 2 in W, High Carbon Steel Blade, Stiff Blade Flexibility
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
Milwaukee® 48-13-5620 Heavy Duty Solid Center Ship Auger Bit, 5/8 in Dia, 18 in OAL, 15 in L Spiral Flute, 7/16 in Shank
The Milwaukee® 5/8 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Browning® 1069863 Split Taper Bushing With Keyway, 30 mm Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 49.2125 mm OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
5/16" X 6" ZINC-PLATED EYEBOLT-NTL124065 >
