Crosby® 1018473 G-209 Anchor Shackle, 3.25 ton Load, 5/8 in, 3/4 in Dia Pin Screw Pin, Hot Dipped Galvanized
Crosby® 1018473 G-209 Anchor Shackle, 3.25 ton Load, 5/8 in, 3/4 in Dia Pin Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018473
-
CountryUSA
-
Load Capacity3.25 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length2-3/8 in
-
Inner Width1.69 in
-
Size5/8 in
-
Opening Size1.06 in
-
Body MaterialCarbon Steel
-
Overall Depth0.69 in
-
Overall Length4.19 in
-
Overall Width3.34 in
-
Eye Outer Size1-1/2 in
-
Pin Diameter3/4 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
- Capacities 1/3 through 55 m ton, grade 6
- Forged quenched and tempered, with alloy pins
- Hot-dip galvanized or self-colored
- Sizes 3/8 in and below are mechanically galvanized
- Fatigue rated
- Shackles 25t and larger are RFID equipped
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP64 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018473 G-209 Anchor Shackle, 3.25 ton Load, 5/8 in, 3/4 in Dia Pin Screw Pin, Hot Dipped Galvanized
Crosby® 1018473 G-209 Anchor Shackle, 3.25 ton Load, 5/8 in, 3/4 in Dia Pin Screw Pin, Hot Dipped Galvanized
Arlington Snap2IT® 40AST Cable Connector With Insulated Throat and Red Tinted Inside Clip, 3/8 in Trade, 1/2 in Knockout, 0.405 to 0.612 in Cable Openings, Die Cast Zinc
Arlington Snap2IT® connectors are designed for safe and fast installations of flex, MC, AC and HCF cable and cover the widest cable ranges in the industry. They save time too-about 17 s per fitting. Just snap the fitting onto the cable, then into the electrical box. No tools are required for the installation.
CM® ShopStar® 2000 Single Reeving Electric Chain Hoist, 300 lb Load, 6-1/2 ft Chain/Rope, 10 ft H Lifting, 1/6 hp Power Rating, 115 V AC
The CM® ShopStar® electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads.
Crosby® LOK-A-LOY® 1015113 A-1337 Connecting Link, 5/16 in Trade, 5700 lb Load, 100 Grade, Forged Alloy Steel
Crosby® LOK-A-LOY® 1015113 A-1337 Connecting Link, 5/16 in Trade, 5700 lb Load, 100 Grade, Forged Alloy Steel
Wilton® WL9-14228 Classic 400 Extra Deep Throat Regular Duty C-Clamp, 2-1/2 in D Throat, 0 to 3 in Clamping, 9/16 in Screw
Wilton Classic 400 series c-clamps are ideal for steel fabrication, industrial maintenance and repair operations. Each c-clamp is drop forged and features an ACME rolled spindle with black oxide coating, replaceable Perma-Pads® and a V-grooved anvil for secure holding of all materials.
Makita® A-93815 Saw Blade, 7-1/4 in Dia x 0.059 in THK, 5/8 in Arbor, 36 Teeth
The Makita® 7-1/4 in (36T) cermet tipped saw Blade is for general purpose cutting in ferrous materials. The cermet tips last 2X longer than standard carbide tips. The Blade makes fast, virtually burr-free cuts and leaves the material cool to the touch.
