Crosby® 1019472 2130-1/2 Anchor Shackle, 2 ton Load, 1/2 in, 0.64 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019472 Anchor Shackle, 2 ton Load, 1/2 in, 0.64 in Dia Bolt Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1019472
-
CountryUSA
-
Load Capacity2 ton
-
FinishHot Dipped Galvanized
-
SeriesG-2130
-
Inner Length1-7/8 in
-
Inner Width1-5/16 in
-
Size1/2 in
-
Opening Size0.81 in
-
Body MaterialCarbon Steel
-
Overall Length3.28 in
-
Overall Width2.8 in
-
Eye Outer Size1.19 in
-
Pin Diameter0.64 in
-
Pin MaterialAlloy
-
Pin TypeBolt
- Working load limit and grade 6 permanently shown on every shackle
- Approved for use at -40 to 400 deg F
- 3.1 Certification as standard available for charpy and statistical proof test from 3.25 ton up to 25 tons to DNV2.7-1 and EN13889
- Crosby® 3.25 ton through 25 ton G2130OC anchor shackles are type approved to DNV certification notes 2.7-1 offshore containers
- The Crosby® shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- All other 2130 shackles can meet charpy requirements of 42 J average at -4 deg F when requested at time of order
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 216FG3 |
-
UNSPSC24101641
-
Standards/ApprovalsASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV2.7-1 Certified|EN13889|Federal Spec RR-C271F|Type IVA|Grade A|Class 3
-
Catalog
Recently Viewed
Crosby® 1019472 2130-1/2 Anchor Shackle, 2 ton Load, 1/2 in, 0.64 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019472 Anchor Shackle, 2 ton Load, 1/2 in, 0.64 in Dia Bolt Pin, Hot Dipped Galvanized
MORSE® 10096 1302 General Purpose Taper Shank Drill Bit, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, #4 Morse Taper Shank Taper, HSS
Gates 5-VX-960 Industrial V-Belts - 5VX Section, 5/8 in Top Width, 1 Strand, 96.0000 in Nominal Outside Length, Cogged
Finding a belt that fits into your compact machinery without sacrificing power or efficiency is a daily challenge. When every inch of space is precious and traditional belts just don't cut it, the Super HC Molded Notch (MN) V-belt is your solution. This bandless, high-performance belt, crafted from ethylene elastomer with precision-molded notches, provides superior cord support and flexibility to improve load distribution and reduce maintenance needs. Whether you aim to boost your drive efficiency or minimize downtime, Gates Super HC MN V-belts deliver the durability and performance to keep your industrial processes running smoothly.
MORSE® 31571 2195M Adjustable Round Split Threading Die, M12x1.75 Thread, 3/8 in THK, 1 in OD Die, HSS
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Adjustable straight handle tap wrenches have one threaded handle which is attached to one of the clamps. The clamp is opened to insert the tool and then tightened down against the tool to secure it. Used with larger taps, reamers or screw extractors.
