Campbell® T9640635 Industrial Grade Anchor Shackle, 1 ton Load, 3/8 in, 0.43 in Dia Screw Pin, Galvanized
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418211669
-
Manufacturer Part NumberT9640635
-
CountryUSA|Canada
-
Load Capacity1 ton
-
FinishGalvanized
-
TypeIndustrial Grade
-
Inner Length1.44 in
-
Inner Width1 in
-
Size3/8 in
-
Opening Size0.67 in
-
Body MaterialDrop Forged Carbon Steel
-
Eye Outer Size1.05 in
-
Pin Diameter0.43 in
-
Pin MaterialDrop Forged Carbon Steel
-
Pin TypeScrew
- WLL Marked on Each Shackle
- Do not exceed the working load limit
- Do not exceed the working load limit
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 24F923 |
-
UNSPSC24101641
-
Package DescriptionEACH
-
Standards/ApprovalsUPC Listed
-
WarrantyLifetime Limited
-
Catalog
Recently Viewed
Campbell® T9640635 Industrial Grade Anchor Shackle, 1 ton Load, 3/8 in, 0.43 in Dia Screw Pin, Galvanized
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
BBI 847194 Partially Threaded Cap Screw, 3/8-24, 2-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847194 Partially Threaded Cap Screw, 3/8-24, 2-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
5/16" X 2" USS Carriage Bolts
1-1/8" -ID S-FLEX COUPLING HALF-LOV6S11/8 >
Hougen® 12242 12000 Annular Cutter, 1-5/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
#6 X 3/4" Round Head Slotted Wood Screw
