Crosby® 1018614 Anchor Shackle, 17 ton Load, 1-1/2 in, 1.63 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018614 Anchor Shackle, 17 ton Load, 1-1/2 in, 1.63 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018614
-
CountryUSA
-
Load Capacity17 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length5-3/4 in
-
Inner Width3-7/8 in
-
Size1-1/2 in
-
Opening Size2-3/8 in
-
Body MaterialCarbon Steel
-
Overall Length10 in
-
Overall Width7.33 in
-
Eye Outer Size3.63 in
-
Pin Diameter1.63 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP71 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018614 Anchor Shackle, 17 ton Load, 1-1/2 in, 1.63 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018614 Anchor Shackle, 17 ton Load, 1-1/2 in, 1.63 in Dia Screw Pin, Hot Dipped Galvanized
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 1.5mm (1/16") Diameter.
A-LINK BELTING >(FT)-JASAACCULINK >
United Abrasives-SAIT 27360 Mounted Point, W220 Point, 1 in Dia x 1 in L Head, 1/4 in Dia Shank
United Abrasives-SAIT 27360 Mounted Point, W220 Point, 1 in Dia x 1 in L Head, 1/4 in Dia Shank
MORSE® 59556 5970 Premium Carbide Burr, Ball Head, 1/4 in Dia Head, 7/32 in L of Cut, 2 in OAL, Double Cut
MORSE® 59556 5970 Premium Carbide Burr, Ball Head, 1/4 in Dia Head, 7/32 in L of Cut, 2 in OAL, Double Cut
