Crosby® 1019613 G21030-1-3/8 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1.53 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019613 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1.53 in Dia Bolt Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1019613
-
CountryUSA
-
Load Capacity13.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-2130
-
Inner Length5-1/4 in
-
Inner Width3.63 in
-
Size1-3/8 in
-
Opening Size2-1/4 in
-
Body MaterialCarbon Steel
-
Overall Length9.16 in
-
Overall Width7.21 in
-
Eye Outer Size3-5/16 in
-
Pin Diameter1.53 in
-
Pin MaterialAlloy
-
Pin TypeBolt
- Working load limit and grade 6 permanently shown on every shackle
- Approved for use at -40 to 400 deg F
- 3.1 Certification as standard available for charpy and statistical proof test from 3.25 ton up to 25 tons to DNV2.7-1 and EN13889
- Crosby® 3.25 ton through 25 ton G2130OC anchor shackles are type approved to DNV certification notes 2.7-1 offshore containers
- The Crosby® shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- All other 2130 shackles can meet charpy requirements of 42 J average at -4 deg F when requested at time of order
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV2.7-1 Certified|EN13889|Federal Spec RR-C271F|Type IVA|Grade A|Class 3
-
Catalog
Recently Viewed
Crosby® 1019613 G21030-1-3/8 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1.53 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019613 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1.53 in Dia Bolt Pin, Hot Dipped Galvanized
14-OZ HI-TEMP #2 LITHIUM GREASE-SPL01500 >
717914R DO-IT-BEST/DO IT 1/8" MESH X 24" H. X 100 ' L. 27-GAUGE HARDWARE CLOTH
SELF SERVICE CARTON. EASY TO DISPLAY AND IS SELF MERCHANDISING. IDEAL FOR A WIDE VARIETY OF APPLICATIONS INCLUDING GARDENING PROJECTS, CRAFTS, GUTTER GUARD, ANIMAL CONTROL, CAGES, TREE GUARDS, AMD MORE. ALL 8 X 8 MESH ASH 1/8" OPENINGS WHICH EQUALS 64 OPENINGS PER SQUARE INCH.
-JWH717914R>
Milwaukee® M12™ FUEL™ 2504-20 Cordless Hammer Drill, 1/2 in Keyless Chuck, 12 VAC, 0 to 450/0 to 1700 rpm No-Load, Li-Ion Battery
The M12 FUEL™ hammer drill driver is the most capable, lightest weight, most compact tool in its class. The POWERSTATE™ brushless motor delivers the power to do a wide variety of applications at 1700 RPM’s and 350 in-lbs of torque. Weighing only 2.3 lbs it is extremely portable, great for overhead applications, reduces fatigue throughout the day. At 6.6 in. in length this tool has the best access in tight spaces. Redlink™ plus intelligence protects the tool from overloads and overheating while ensuring maximum performance. Using REDLITHIUM™ 2.0 Ah compact and 4.0 Ah extended capacity battery packs they deliver more work per charge and more work over the life of the pack than competitive batteries.
Leviton® 5821 Heavy Duty Grounding Narrow Body Straight Blade Receptacle, 250 V AC, 20 A, 2 Poles, 3 Wires, Brown
Leviton® line of Heavy Duty Specification Grade receptacles are designed and manufactured to withstand the most demanding environments. Available in a wide variety of configurations, including isolated ground, tamper-resistant, etc., these Commercial Grade devices are the electrical contractors choice for use in hotels, schools, hospitals and commercial office buildings.
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
