Crosby® 1018393 Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018393 Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018393
-
CountryUSA
-
Load Capacity0.75 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length1.22 in
-
Inner Width0.84 in
-
Size5/16 in
-
Opening Size0.53 in
-
Body MaterialCarbon Steel
-
Overall Length2.09 in
-
Overall Width1.71 in
-
Eye Outer Size3/4 in
-
Pin Diameter3/8 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP60 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018393 Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018393 Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
RIDGID® 47735 Pipe Die, 1/8 in Conduit/Pipe, 1/8-27 NPT Thread, Right Thread, 4 Pieces, For Use With 504A, 711, 713, 811A, 815A, 816, 817 and 842 Universal Die Heads, Alloy Steel
RIDGID® 47735 Pipe Die, 1/8 in Conduit/Pipe, 1/8-27 NPT Thread, Right Thread, 4 Pieces, For Use With 504A, 711, 713, 811A, 815A, 816, 817 and 842 Universal Die Heads, Alloy Steel
RIDGID® 49712 Reversible Pipe Die, 3/4 in Conduit/Pipe, 3/4-14 NPT Thread, Right Thread, For Use With OO-R, 11-R, 12-R, O-R Ratchet Threaders, HSS
RIDGID® 49712 Reversible Pipe Die, 3/4 in Conduit/Pipe, 3/4-14 NPT Thread, Right Thread, For Use With OO-R, 11-R, 12-R, O-R Ratchet Threaders, HSS
MORSE® 58278 5954 Center Cutting Long Length Single End End Mill, 3/4 in Dia Cutter, 2-1/4 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 5 in OAL, Bright
MORSE® 58278 5954 Center Cutting Long Length Single End End Mill, 3/4 in Dia Cutter, 2-1/4 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 5 in OAL, Bright
Campbell® T9501424 Grab Hook, 1/4 in Trade, 2600 lb Load, 43 Grade, Clevis Attachment, Forged Steel
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
HCI Preferred Supplier 10002 Long Rod Nut, 3/16 in Nominal, SAE Flare Threaded UNF, Brass
HCI Preferred Supplier 10002 Long Rod Nut, 3/16 in Nominal, SAE Flare Threaded UNF, Brass
