Crosby® 1018375 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018375 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018375
-
CountryUSA
-
Load Capacity0.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length1.13 in
-
Inner Width0.78 in
-
Size1/4 in
-
Opening Size0.47 in
-
Body MaterialCarbon Steel
-
Overall Length1.84 in
-
Overall Width1.43 in
-
Eye Outer Size0.61 in
-
Pin Diameter5/16 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP59 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018375 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018375 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Screw Pin, Hot Dipped Galvanized
#1EX ACTO PRECISION KNIFE-JWH304183 >
Crosby® LOK-A-LOY® 1015145 A-1337 Connecting Link, 5/8 in Trade, 22600 lb Load, 100 Grade, Forged Alloy Steel
Crosby® LOK-A-LOY® 1015145 A-1337 Connecting Link, 5/8 in Trade, 22600 lb Load, 100 Grade, Forged Alloy Steel
Milwaukee® TILT-LOK 6390-21 Corded Circular Saw Kit, 7-1/4 in Dia Blade, 5/8 in Arbor/Shank, 1-13/16 in at 45 deg, 1-11/16 in at 50 deg, 2-7/16 in at 90 deg, 2-9/16 in at 90 deg Cutting, Right Blade Side
The Tilt-Lok™ handle on Milwaukee's 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 Lb. and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability.
Milwaukee® 48-40-4172 Endurance® Combination Regular Kerf Circular Saw Blade, 10-1/4 in Dia x 0.079 in THK, 5/8 in Arbor, Alloy Steel Blade, 40 Teeth
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
Porter-Cable® 44858 Flush Bevel Combination Router Bit, 7/16 in Dia Cutting, 1-3/4 in OAL, 1/4 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 44858 Flush Bevel Combination Router Bit, 7/16 in Dia Cutting, 1-3/4 in OAL, 1/4 in D Cutting, 1/4 in Dia Shank, Carbide
