Crosby® 1018017, G-213-1/4, Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
Crosby® 1018017 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018017
-
CountryUSA
-
Load Capacity0.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-213
-
Inner Length1.13 in
-
Inner Width0.78 in
-
Size1/4 in
-
Opening Size0.47 in
-
Body MaterialCarbon Steel
-
Overall Length1.84 in
-
Overall Width1.34 in
-
Eye Outer Size0.61 in
-
Pin Diameter5/16 in
-
Pin MaterialAlloy
-
Pin TypeRound
- Working load limit permanently shown on every shackle
- Shackles are quenched and tempered and can meet DNV impact requirements of 42 J at -20 deg C
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|Federal Spec RR-C-271F|Type IVA|Grade A|Class 1
-
Catalog
Recently Viewed
Crosby® 1018017, G-213-1/4, Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
Crosby® 1018017 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
NIBCO 836-015, 1-1/2 in nominal, Socket x MNPT end style, SCH 80/XH, PVC, Domestic
Nominal Size: 1-1/2 inches Material: Schedule 80 PVC (Dark Gray) End Connection 1: Socket / Slip (SXT) — Welded using PVC solvent cement End Connection 2: Male National Pipe Thread (MNPT / MIPT) Pressure Rating: Typically rated up to 150 PSI at 73°FMax Temperature: 140°F (60°C)
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
4" X 10' SLOTTED AGRICULTURE DRAIN-ADS4X10SLOT >
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
GP® 4032MD Deep Length Socket, 1 in, 32 mm Hex Socket, 6 Points

