Crosby® 1016887 HR-125 Swivel Hoist Ring, 800 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 5/16-18 UNC Thread
Crosby® 1016887 HR-125 Swivel Hoist Ring, 800 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 5/16-18 UNC Thread
-
BrandCrosby®
-
Manufacturer Part Number1016887
-
CountryUSA
-
Load Capacity800 lb
-
Thread Size5/16-18 UNC
-
SeriesHR-125
-
Dimensions1.87 in W
-
Swivel Angle360 deg
- Rated at 100% at 90 deg angle
- 100% Individually proof tested to 2-1/2X the working load limit with certification and statistically magnetic particle inspected
- Each product has a product identification code (PIC) for material traceability, along with the working load limit and the name Crosby® or "CG" stamped into it
- Importantly, these hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability
- Fatigue rated to 20000 cycles at 1-1/2X the working load limit
- Individually packaged along with proper application instructions and warning information
- Bolt is secured with E-clip, threads are grooved, this method allows for easy disassembly and assembly of hoist ring for thorough examination of all components
- Bolts are individually proof tested
- Top washer has the following features - the working load limit and recommended torque value are permanently stamped into each washer
- Washer is color coded for easy identification, red for UNC thread
- All threads listed are UNC
-
UNSPSC24101600
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
Crosby® 1016887 HR-125 Swivel Hoist Ring, 800 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 5/16-18 UNC Thread
Crosby® 1016887 HR-125 Swivel Hoist Ring, 800 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 5/16-18 UNC Thread
MORSE® 51092 5374 Standard Length Jobber Length Drill Bit, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 51092 5374 Standard Length Jobber Length Drill Bit, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
HCI Preferred Supplier 32042 Elbow, 3/8 in Nominal, Hose Barb x MIP End Style, CA377 Brass
HCI Preferred Supplier 32042 Elbow, 3/8 in Nominal, Hose Barb x MIP End Style, CA377 Brass
MORSE® 12053 1330L General Purpose Jobber Length Drill Bit, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 12053 1330L General Purpose Jobber Length Drill Bit, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
2" FINE/BLUE CONDITIONING DISC-PEANW2FQ >
MORSE® 12017 1330L General Purpose Jobber Length Drill Bit, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 12017 1330L General Purpose Jobber Length Drill Bit, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
