Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
-
BrandCrosby®
-
Manufacturer Part Number1016935
-
CountryUSA
-
Load Capacity5000 lb
-
Thread Size3/4-10 UNC
-
SeriesHR-125
-
Dimensions3.35 in W
-
Swivel Angle360 deg
- Rated at 100% at 90 deg angle
- 100% Individually proof tested to 2-1/2X the working load limit with certification and statistically magnetic particle inspected
- Each product has a product identification code (PIC) for material traceability, along with the working load limit and the name Crosby® or "CG" stamped into it
- Importantly, these hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability
- Fatigue rated to 20000 cycles at 1-1/2X the working load limit
- Individually packaged along with proper application instructions and warning information
- Bolt is secured with E-clip, threads are grooved, this method allows for easy disassembly and assembly of hoist ring for thorough examination of all components
- Bolts are individually proof tested
- Top washer has the following features - the working load limit and recommended torque value are permanently stamped into each washer
- Washer is color coded for easy identification, red for UNC thread
- All threads listed are UNC
-
UNSPSC24101600
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Crosby® 1016935 HR-125 Swivel Hoist Ring, 5000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 3/4-10 UNC Thread
Square-D 30-AMP 2-POLE 120-VOLT CONTACTORS SQU 8910-DPA-32-V-02
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This two pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
1-1/2 TON 30' LIFT CHAIN HOIST-JET101711>
BRASS BRUSH SET 2-piece brass brush set. Ideal for cleaning of rust and dirt.
1-TON L-90 10'-LIFT CHAIN HOIST-JET101510 >
Alemite® 385003-B1 Oil Mist Head, 65 cfm, 2 Nozzle, For Use With 3726-A6 and 3726-B6 Oil Mist Generator
Alemite® 385003-B1 Oil Mist Head, 65 cfm, 2 Nozzle, For Use With 3726-A6 and 3726-B6 Oil Mist Generator
