Crosby® 1016975 HR-125 Swivel Hoist Ring, 15000 lb Load, 180 deg Pivot, 360 deg Swivel, 1.19 in Bail, 1-1/4-7 UNC Thread
Crosby® 1016975 HR-125 Swivel Hoist Ring, 15000 lb Load, 180 deg Pivot, 360 deg Swivel, 1.19 in Bail, 1-1/4-7 UNC Thread
-
BrandCrosby®
-
Manufacturer Part Number1016975
-
CountryUSA
-
Load Capacity15000 lb
-
Thread Size1-1/4-7 UNC
-
SeriesHR-125
-
Dimensions6.18 in W
-
Swivel Angle360 deg
- Rated at 100% at 90 deg angle
- 100% Individually proof tested to 2-1/2X the working load limit with certification and statistically magnetic particle inspected
- Each product has a product identification code (PIC) for material traceability, along with the working load limit and the name Crosby® or "CG" stamped into it
- Importantly, these hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability
- Fatigue rated to 20000 cycles at 1-1/2X the working load limit
- Individually packaged along with proper application instructions and warning information
- Bolt is secured with E-clip, threads are grooved, this method allows for easy disassembly and assembly of hoist ring for thorough examination of all components
- Bolts are individually proof tested
- Top washer has the following features - the working load limit and recommended torque value are permanently stamped into each washer
- Washer is color coded for easy identification, red for UNC thread
- All threads listed are UNC
-
UNSPSC24101600
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
Crosby® 1016975 HR-125 Swivel Hoist Ring, 15000 lb Load, 180 deg Pivot, 360 deg Swivel, 1.19 in Bail, 1-1/4-7 UNC Thread
Crosby® 1016975 HR-125 Swivel Hoist Ring, 15000 lb Load, 180 deg Pivot, 360 deg Swivel, 1.19 in Bail, 1-1/4-7 UNC Thread
Oatey® 43501 Offset Level-Fit Closet Flange With Metal Ring, 3 to 4 in Pipe, Plastic/PVC
Oatey® Level Fit Closet Flange with stainless steel ring sits flush on the floor and quickly and easily connects a water closet outlet to a plumbing system. Stainless steel rings have a bolt slot shelf to stabilize bolts during installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
DISC HOLDERS-SAI95172>
DRILLCO 7G124ADC 7000G Carbide Burr, Pointed End, Tree Head, 3/8 in Dia Head, 3/4 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
MORSE® 11987 1330L General Purpose Jobber Length Drill Bit, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 11987 1330L General Purpose Jobber Length Drill Bit, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 11425 1340 General Purpose Jobber Length Drill Bit, #17 Drill - Wire, 0.173 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11425 1340 General Purpose Jobber Length Drill Bit, #17 Drill - Wire, 0.173 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
