KleinĀ® 1802-30SR Block and Tackle With Standard Hooks, 750 lb Lifting, 3/8 in Dia x 25 ft L Rope
Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings. Available with standard snap hooks or guarded snap hooks (with snap hook nose lengthened to extend over the latch or keeper).
-
BrandKleinĀ®
-
UPC092644480232
-
Manufacturer Part Number1802-30SR
-
CountryUSA|Canada
-
MaterialAluminum Alloy/Galvanized Steel
-
Rope Diameter3/8 in
-
Rope Length25 ft
-
Hook Opening1-7/8 in
-
Lifting Capacity750 lb
- These are NOT occupational protective hooks
- NOT for human support
- Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load
- Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings
- All Klein block and tackle use high-quality, 3/8 in (10 mm) diameter rope
- 25-Foot (7.62 m) rope length
- Hooks fit under insulator and engage pin on cross arm
- Maximum safe load is 750-pound (340 kg)
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 40Y876 |
| MSC | 45865961 |
-
Alternative Part Number8510638
-
UNSPSC31162604
-
IDEA Index ID8510638
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information
-
Catalog
Recently Viewed
KleinĀ® 1802-30SR Block and Tackle With Standard Hooks, 750 lb Lifting, 3/8 in Dia x 25 ft L Rope
Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings. Available with standard snap hooks or guarded snap hooks (with snap hook nose lengthened to extend over the latch or keeper).
NIBCOĀ® 853-030 Blind Flange, 3 in, PVC, 150 lb, Domestic
1-1/4" ROMEX CLAMP CONNECTOR-ELEL106 >
Stanley Proto J4900A 3/8-Inch and 1/2-Inch Drive Hex Bit Set, 10-Piece-PROJ4900A
#13 S-FLEX RUBBER COUPLING INSERTS -LOV13E >
CampbellĀ® T9640835 Industrial Grade Anchor Shackle, 2 ton Load, 1/2 in, 0.62 in Dia Screw Pin, Galvanized
CampbellĀ® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the CampbellĀ® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
