MM-150-600 JET EQUIPMENT & TOOLS
BOTTOM HOOKS-JETMM150600>
Recently Viewed
BOTTOM HOOKS-JETMM150600>
Milwaukee® 49-57-8201 Quick-Change Hole Saw Plate Cutter, 11/16 in Dia, 1/2 in D Cutting, Carbide Cutting Edge
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.
Morse® Real McCoy® TA56 Hole Saw, 3-1/2 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® Real McCoy® TA56 Hole Saw, 3-1/2 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Milwaukee® 49-57-8205 Quick-Change Hole Saw Plate Cutter, 13/16 in Dia, 1/2 in D Cutting, Carbide Cutting Edge
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 13/16 in. diameter.
Milwaukee® HOLE DOZER™ 49-56-0702 Hole Saw With Carbide Teeth, 3/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 7/16 in Arbor
The MILWAUKEE® 3/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
